Counting matching models…
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…
My Original Project https://makerworld.com/it/models/655968#profileId-582989 This simple tool allows you to remove dust and dirt from USB ports and clean the inner part of the rubber, which often gets dirty. 1 gram and 8 minutes of printing
Star Wars earphones holder Darth Vader, C3PO and Stormtrooper Easy to print, no supports @3DPrintBunny
Earphone cabel holder / cabel organizer
Here in Sapir College - Israel we have a Call center equipped with some 20 stations with Jabra earphones It seems that these earphones (not cheap) have a serious flaw in design , 50% of the are already broken in the same place, they…
Are you bored of not being able to use your bluetooth headset on your desktop PC? Even more bored of plugging and unplugging wired earphones? This friendly cat helps you hold them so you can leave them plugged and hanging next to your PC…
Note: it works better if you print it with flex material.
WARNING/DISCLAIMER This model might not fit into an actual Altoid box (I've used a similar metal case). However it should be easy to modify the provided FreeCAD file to adapt to boxes of similar size. This model allows to coil your…
A screw top container for holding wired earphones. They are kept neatly and when removed, come out without tangling Wrap around 2 or 3 fingers and put in container around the centre cone. If lifted out from either end they don’t get…
This keychain has been designed with the purpose of being able to wrap the cable of your earphones in an orderly manner without having to worry about unwanted tangles. It has a simple double fork wrench design with a maximum length of 70…
desk mount for holding your headphones and earphones.
You may want to adjust this in customer depending on the length of your cable. To do so, go to the customizer interface and adjust the "h" variable. This adjust the height of the wrapper. This is a design based from "iPhone 7 Earphone…
I recently bought a pair of Superlux HD381s for in-ear monitoring. They are great in-ears, and the price was very keen. The only problem is they came in a disposable plastic bag, in a cardboard box. This wee box has a spindle on the lid…
Easy to print pokeball case. Print at 0.2 layer height and use 3 perimetres for extra strength. Traditionally, the top cover should be red, the base white with a colour change to black, the bigger circle black and the smaller one white.…
LucidSound LS35X Rotating hinge for earphones Deutsch Hallo zusammen ich habe auf Anfrage eines Bekannten ein neues Drehschanier für den Lucidsound LS35X Entwickelt, da dieses sehr anfällig ist und sehr schnell ohne große belastung…
Description I made these TPU earbud/earphone running fins/wings so they would not fall out of my ears anymore and I am very pleased with how they work for me. The inner diameter of the hole is 18mm which is perfect fit for MI airdots.…
In smartphones, you can take pictures not only using the interface, but also using the volume keys. If you have earphones, you can use their buttons as a trigger to record a timelapse! Additional head movements are added automatically to…
Finally a earbuddy for samsung earphones :) Category: Audio
Wraps the earphone cable to avoid entanglement in the pocket Printing: 0,2 layer layer height 10% infill 3 perimeter should be enough 3 top and bottom layers
Roughly copied from the original. And a new model for use with these: https://www.amazon.com/dp/B07Z4LV116 Best printed in PETG.
Dumb and useful model for DIYers who want to make their own earphones or if your earphone shell broke. Hope you'll like it. For ‘’how to make your earphones'' and more model ideas send me email to this adress: [email protected]
small holder so you can take your wired earphones anywhere
Necesita soportes para los ganchos // Need supports for hooks
Can be printed with any default setting, though a minimal layer height will make the inner bevels look smoother. Model seen in thumbnail was made with Panchroma Matte Army Beige and Matte Cotton White - filament was changed before the 3…
Dimensions for power banks : 14.9 mm x 80 mm 21.9 mm x 80 mm You will need 4 screw : 2 M3 x 10mm (max 12mm) for leg/foot 2 M3 x 16mm for leg/high
earphone case with sliding lid. At first it may be hard to close, but after some use you will be able to use it perfectly. If you use a higher quality you may avoid this problem
A convenient screw top box to store your earphones in a bag Print Settings Print the files exactly with the orientation I gave them Rafts Yes (2 layers) (Only on the top part) Supports Yes (Only on the top part) Resolution 0.20 Infill 15
Earphone for Oculus Quest 2. This earphone are especially designed to be attached to the original Elite strap. To complete the project you need the following stuff: Earphone drivers 3.5 audio jack 3x18mm screw A piece of fabric to warp…
The rubber in the power button eventually degrades. You can tear the button off, stick this printed part in, then cover it with vinyl (electrical) tape for a fully functioning repair. It's just a 3mm×3mm×6mm cube, but now you don't need…
2nd version of my samsung earbug 1st version: http://www.thingiverse.com/thing:694661 Category: Audio
My in-ear earbuds kept falling out during workouts and runs, especially during fast movement. Instead of buying new ones, I designed this simple OWS-style ear hook extension to keep them locked in place. This small clip attaches to your…
Usage tips: place the main earphones inside route cables out any hole and wrap around to other end stick the 3.5mm jack into the center Category: Audio
A box to store your earphones without tangling the cable
Simple Mi True Wireless Earphones 2 mount on Honeycomb storage wall by RostaP
Designed for hanging on a 22mm diameter rod, but can be hung on anything. The holder can be either full or you can use the predefined modifier boxes, where you can set different fillings or leave it leaky. Printed from PLA with nozzle…
A small clip/support for earphones (KZ in my case) to stay in one position along the phone horizontal line (see photos for a better understanding). I made this model (in Fusion 360) because the Xiaomi Redmi Note 10 Pro has a cheap 3.5mm…
It is a simple support for headphones, with the option to be glued or screwed on the wall or desk side. Print settings: 0.4 layer height 0.4 nozzle diameter No supports needed Enjoy it!!!
Description A model to replace the outer casing of the Panasonic RP-HJE125E earphones to allow for sleeping on the side with them on. It's not perfect and therefore not final. I'd like to eventually make it smaller still. This mod, of…
Make sure you scale it down to 7 cm length.
PLA prusament galaxy black and orange ... 0,4 mm nozzle
5*3mm Magnetic
Earbus tip for 3d print if u have lost it :) Originally made for O2 pods+ but its for and earphones. Print it from TPU -more softer-more comfy, 1 perimeter 0 bottom layers, slow speed (10-30mm/s) ironing ON. I added a .blend file so remix…
voici mon doc charjeur xiaomi MI True Wireless Earphones 2 Basic que j'ai fait moi même. PARAMÈTRES D’IMPRESSION 3D buse 0,4mm pla 2h30
While travelling, earpods tend to tangle up in the bag or the pocket. This holder should help you prevent that. The earphones and the port snap fit into the holder and hold everything in place.
I found that having just the headphone cups alone wasn't entirely a complete solution so I made this to fill in the gap between the head and the top headphone band. It just snaps right on. You may use glue on the 2" foam backer rod that…
It prints very wel with PLA and PTU.
Per imprimir directament. No fa falta suports per imprimir-ho. També hi ha espai per guardar les esponges de recanvi.
I made this model mainly for a Type-C pin . However, by using a longer paper clip , it should also be possible to make a Type-B pin , but this has not been tested yet . There are two models included: one for the plug (where the clip is…
Have you ever lost your wireless earbuds during sleep on a bus, in a car or in bed? Or maybe you like to run but earphones like to fall out of your ears? I've got a perfect solution for a problem humanity made. I designed a cable…
Spare part for: Beyerdynamic DT 860, DT 440, DT 660 maybe: DT 511s A weak point is that the bow likes to break at the ball. There is no official spare part to buy. If the small bridges above the cable Channel interfere, pleased remove…
This is perfect fit stand for earphones with curved edges. I have made it for B&W PX series earphones but also other earphones should fit.
This model is replacement for Panasonic RP-HS34E body. Assembly: 1/ In disassembly the original, there is a one screw inside - pop out the speaker (do not pull too much - you can destroy the wafer coil like on the picture). The screw is…
Three cord winders to stop cables turning into a knot in your bag or drawer: a small one for wired earphones, a medium one for phone charging cables and a large one for laptop and power cables. Each winder is a bone shape: hook one end of…
My in-ear earbuds kept falling out during workouts and runs, especially during fast movement. Instead of buying new ones, I designed this simple OWS-style ear hook extension to keep them locked in place. This small clip attaches to your…
Can be printed with any default setting, though a minimal layer height will make the inner bevels look smoother. Model seen in thumbnail was made with Panchroma Matte Army Beige and Matte Cotton White - filament was changed before the 3…
Can be printed with any default setting, though a minimal layer height will make the inner bevels look smoother. Model seen in thumbnail was made with Panchroma Matte Army Beige and Matte Cotton White - filament was changed before the 3…
