2015-2021 DODGE CHALLENGER COLD AIR HEADLIGHT INTAKE RING TUBE WITH GRILLS
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€8.72 – €10.66 net (excluding VAT)
For file: CHALLENGER_0.1mm_PLA_MK3_13h9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.69 excluding VAT (range midpoint).
- Weight reported by the author
- 49 g
- Print time reported by the author
- 13.15 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Add a bit of color to your tubes.
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 549
- Makes
- 1
- Views
- 5,695
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
$100 for velocity stacks. No thanks. These will fit all Challenger models from the SXT to the Demon as long as they don't have the light tubes installed. On some models, you'll need to reach in behind the headlight and push in the 3 clips then push out the original headlight plug.
I've been running mine in cold and hot weather for about a month now and no problems at all.
Print in PLA, PETG, whatever you want, whatever color you want. Use a 60mm x 1.5mm o-ring to secure them in the headlight tube. You can get those cheap on Amazon.
No supports needed and I've includes 3 grill types. The grills insert from the front of the tube at an angle and fit into a ring printed into the tube. It's a tight fit but they will go in. Once in your not getting them out.
This is for private use only. NO COMMERCIAL USE, no EXCEPTION.