Honda Ruckus/Zoomer LED Headlight Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.49 – €5.48 net (excluding VAT)
For file: LED Support_0.15mm_PETG_MK3S_5h50m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.99 excluding VAT (range midpoint).
- Weight reported by the author
- 48 g
- Print time reported by the author
- 5.83 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adapter to convert the halogen headlights to 5.75" LED headlights
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 218
- Makes
- 2
- Views
- 1,529
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Standard Digital File License
The LED Support was designed to work as an adaptor to install 5.75" LED headlights in the original support that the Honda Ruckus/Zoomer uses for the dual headlights.
The LED headlights have a tab that you need to orient between the tabs that the adaptor has. It's quite important to install it this way, as this prevents the headlight from rotating.
PRINTING PARAMETERS
Use at least 30% infill and 4 perimeters. The supports settings have been configured in the .3mf file. You don't need to tweak them.
The file has been tested with normal PETG. If you want to use PETG-CF or other material, you might need to tweak the infill percentage to control the stiffness, so you can install the headlight into the adaptor.
INSTALLATION INSTRUCTIONS
You would need:
4x M6 Nyloc or lock nuts
4x M6 button head screws at least 15mm long