1 / 2
Skoda, VW - Headlight Adjustment Gear
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace the old worn out plastic gears with new 3D printed ones!
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 274
- Makes
- 1
- Views
- 964
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
3D model of Skoda Fabia I Headlight Adjustment Gear. The old plastic gears started spinning on the shaft so I made a new ones.
Instructions:
Print orientation: gear up, 10mm hex touching printer bed
PLA (205/65 °C works for me), 0.1 mm layer height, tree supports, 100% infill
Before installation, drill the hole with a 5mm drill bit and coat on the inside with model glue/acetone
Take one bulb out, hold the headlight with your finger in the hole and lightly hammer the softened PLA piece on the knurled shaft.