1 / 1
Headlight for JEEP Wrangler JL 1:8 (3Dsets.com)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
headlight "glass" for Ranger and Wagon (1:8 RC model) - optional accessory for 3Dsets.com models :-)
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 129
- Makes
- 3
- Views
- 1,921
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Before installation can be equipped LED in the headlights:
- I printed the models "Front light - left.stl" and "Front light - right.stl" with holes 5 mm (corresponds to the size of my LEDs).
- I respect the model license (model purchased on 3Dsets.com) and will not publish the modified model. However, it is not a problem to create a hole in PrusaSlicer :-)
- For a 7.4 V battery and two parallel LEDs => two 300 Ω resistors for each (but it depends on the parameters of your installation).
You can also install the headlights (lamps) without LEDs. My
headlights.stl model is universal for both parties.
Material: Prusament PLA Vanilla White