Super 73 Loominade Honeycomb Headlight grill
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is design for the Super73 RX Loominade headlight. It should fit the Kanebilt too (I think it's the same housing?)
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 151
- Makes
- 1
- Views
- 1,282
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Ok so I just bought my Loominade headlight and installed it but thought it would be cool if it had a grill. I didn't like the grills online, so I decided to make my own based on the honeycomb pattern on my Union State rear rack. I printed it in PLA and used 15% infill at 0.16 Layer Height using a raft and tree supports on my Ender3 V2 with a PEI sheet and CRtouch auto leveling. Print time was about 34hrs with my current settings. In the photos, I installed the Version 2 of the headlight grill, and I noticed the fitment was too tight. The holes for the bolts were too exact as well, so I made the overall model 5MM wider and Higher, then I enlarged the holes 1MM. Should be fine now but take it as a warning.