1 / 2
Tesla Fuel Pump Handle (US market chargers only) — zdjęcie 1
1 / 2

Tesla Fuel Pump Handle (US market chargers only)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tesla Fuel Pump Handle for Mobile Charger

Ocena
5 / 5
Polubienia
51
Pobrania
292
Wydruki
2
Wyświetlenia
1611
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Update 12/20/2025:  Revised geometry to fit both Tesla Mobile Charger and Tesla Wall Connector (US market chargers only).  Added test pieces on Plate 4 of the print profile to verify it fits your handle and cable.

I designed my own version of a fuel pump handle for the Tesla Mobile Charger.  This is very sturdy and securely attached to the charging handle.

There is a lip designed into the hex nut holes to hold them in place, you will need to press the nuts in firmly.

You will need:

  • 3x 4' zip ties

  • 8x M3 hex nuts

  • 8x M3x20-25 machine screws

Please note the 3MF file was created in Bambu Studio, it may not open properly in other slicers.

Tagi