1 / 2
Ryobi One + Tool Pegboard Mount — zdjęcie 1
1 / 2

Ryobi One + Tool Pegboard Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

4,28 € – 5,23 € netto (bez VAT)

Dla pliku: ryobi_pegboard_toolholder_0.4n_0.25mm_PLA_COREONE_2h50m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 4,76 € netto (środek widełek).

Masa podana przez autora
100 g
Czas druku podany przez autora
2,82 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Remixed Ryobi One + tool holder to securely attach to a 1/4" pegboard mount.

Ocena
0 / 5
Polubienia
4
Pobrania
22
Wydruki
0
Wyświetlenia
183
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

I was looking for a good mounting solution for my Ryobi tools when I came across a solid design with clever compliant clips by factorem.io. I remixed it to mount to a standard ¼" pegboard (such as Wall Control) using small pegboard expanding pegs from Amazon.

Required Hardware

QTY 2 expanding pegs are required for the current design but it can be remixed to add more mounting holes if required. The counter bores on the bottom side of the mount are intended to let the expanding pegs pull partially away from the pegboard forcing pegs to lock in place, leading to a snug fit.

Printing Considerations

I printed these out of PLA, but I would recommend using something more environmentally durable like PETG or ABS. I would recommend painting on supports on the underside counterbores to avoid sagging.  I removed the shelled underside in hopes of improving printability but infill density and vertical shell parameters are more important now as the shell previously provided the internal rigidity. I uploaded a BGcode file that is likely overkill in terms of strength, I found even the 0.28 DRAFT preset for the core one was strong enough for my lighter tools.

Tagi