1 / 2
Ryobi One + Tool Pegboard Mount — image 1
1 / 2

Ryobi One + Tool Pegboard Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€4.28 – €5.23 net (excluding VAT)

For file: ryobi_pegboard_toolholder_0.4n_0.25mm_PLA_COREONE_2h50m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €4.76 excluding VAT (range midpoint).

Weight reported by the author
100 g
Print time reported by the author
2.82 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Remixed Ryobi One + tool holder to securely attach to a 1/4" pegboard mount.

Rating
0 / 5
Likes
4
Downloads
22
Makes
0
Views
180
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

I was looking for a good mounting solution for my Ryobi tools when I came across a solid design with clever compliant clips by factorem.io. I remixed it to mount to a standard ¼" pegboard (such as Wall Control) using small pegboard expanding pegs from Amazon.

Required Hardware

QTY 2 expanding pegs are required for the current design but it can be remixed to add more mounting holes if required. The counter bores on the bottom side of the mount are intended to let the expanding pegs pull partially away from the pegboard forcing pegs to lock in place, leading to a snug fit.

Printing Considerations

I printed these out of PLA, but I would recommend using something more environmentally durable like PETG or ABS. I would recommend painting on supports on the underside counterbores to avoid sagging.  I removed the shelled underside in hopes of improving printability but infill density and vertical shell parameters are more important now as the shell previously provided the internal rigidity. I uploaded a BGcode file that is likely overkill in terms of strength, I found even the 0.28 DRAFT preset for the core one was strong enough for my lighter tools.

Tags