1 / 1
YZ brace and carrying handle for Prusa Mini/Mini+ — zdjęcie 1

YZ brace and carrying handle for Prusa Mini/Mini+

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Prints with no supports on Prusa Mini. Uses M5 hardware: 3x 12mm bolts, 3x 25mm bolts, 6x T-slot nuts

Ocena
5 / 5
Polubienia
28
Pobrania
105
Wydruki
6
Wyświetlenia
932
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

A simple accessory to improve stability and portability. Designed for M5 mounting hardware: 3x 12mm bolts on the Y axis, 3x 25mm bolts on the Z axis, 6x T-slot nuts, and optional nylon washers. 

This fits on the Prusa Mini bed with 5mm brim. I printed this lying down on the face which contacts the Z axis, 60mm/s, 0.2mm layers, 3 perimeters, 10% gyroid infill, no supports in Atomic Filament PETG. 

v6.1: more clearance for original Prusa Mini

v6: untested compatibility fix for original Prusa Mini & roundovers for many sharp edges; thank you Štěpík for these suggestions in the comments

v5.2: larger cutout for X axis motor cable clearance

v5.1: clearance fixes for the Y axis bearing mounts and X axis motor cables

v5.0: test print, pictured

Tagi