YZ brace and carrying handle for Prusa Mini/Mini+
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prints with no supports on Prusa Mini. Uses M5 hardware: 3x 12mm bolts, 3x 25mm bolts, 6x T-slot nuts
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 105
- Makes
- 6
- Views
- 935
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
A simple accessory to improve stability and portability. Designed for M5 mounting hardware: 3x 12mm bolts on the Y axis, 3x 25mm bolts on the Z axis, 6x T-slot nuts, and optional nylon washers.
This fits on the Prusa Mini bed with 5mm brim. I printed this lying down on the face which contacts the Z axis, 60mm/s, 0.2mm layers, 3 perimeters, 10% gyroid infill, no supports in Atomic Filament PETG.
v6.1: more clearance for original Prusa Mini
v6: untested compatibility fix for original Prusa Mini & roundovers for many sharp edges; thank you Štěpík for these suggestions in the comments
v5.2: larger cutout for X axis motor cable clearance
v5.1: clearance fixes for the Y axis bearing mounts and X axis motor cables
v5.0: test print, pictured