1 / 3
Makita LXT 18v double battery holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip to hold two Makita LXT 18v batteries. Useful for carrying batteries around and keeping them together as a set.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Clip to hold two Makita LXT 18v batteries. Useful for carrying batteries around, keeping them together as a set for 36v equipment like the chainsaw and protecting the electrical contacts
Nice aspects in this design:
- Breakable supports are built into the design. No supports from the slicer are needed when printed standing up. The long bridge where the battery clicks into has a series of very thin walls that improve the bridge quality and snip out easily.
- The hex grip on the side uses an imported DXF file. This was tricky until I created an openscad script to create the DXF with the dimensions needed.
- Both ideas from Slant 3D YouTube:
- "Design 3D printed textures" https://www.youtube.com/watch?v=pUabxkiJAdE
- "Stop using supports" https://www.youtube.com/watch?v=_R2E8VwyNz0
- Fusion 360 design file included with design history captured.
Sliced in Orcaslicer 2.3.0 and printed on FLSun V400 running Klipper 0.13.0 and Moonraker/Mainsail.