Liczymy pasujące modele…
Simple, minimalist Makita 18V LXT tool mount. There is a slight downward slope to the back of the holder to allow gravity to help hold the tool snug. Print standing up with no supports.
Simple, minimalistic battery mount for the Makita 18vVLXT batteries. Batteries can be inserted from either side and the battery locks in place. Print flat, with supports.
I couldn't find a good and minimalistic battery holder so had to create new one. It holds 5Ah batteries wery well and it is possible to put multiple holders aside. Requires a 9mm T-Bolt for fastening Can be printed without support with…
Makita DML800 18V LXT Lithium-Ion Cordless LED Headlamp hanger, wall mounted holder, labelled with DML800. Two versions, horizontal and vertical. Attach with two number six screws. Print as pictured. No supports needed. Battery Holder…
You need to print a multiconnect mount for connecting to the grid. Select Multiconnect for openGrid > BETA openGrid Multiconnect Lock Snap and openGrid Foldable Multiconnect for printing. Installation requires two grid cells , as the…
Cordless tool battery adapter. Skil PWRCORE 20 Battery to Makita skins Extra hardware wire 9mm female fuse terminal x2 female fuse terminal x1 6mm male spade connector x2 M3 x10mm bolt & Hex nut Assembly should be self explanatory, reach…
This bin is designed specifically to hold the Makita LXT LED Flashlight (DML817) for Zach Freedman's Gridfinity system. There is a slot for the included orange diffuser, and the flashlight still fits in the bin even with the diffuser…
This is a Remix of an original Model by Wiseone. For a detailed description please see the original Model. The only change to the original model is an added cutout to be compatible with the Makita 644808-8 spare part as contacts instead…
Description This is a fully 3D printable handheld vacuum cleaner , designed as a compact and modular DIY solution. The design integrates a 50 mm brushless motor , filter system, and a detachable dust collector, all housed in a clean,…
Makita 18V 4 place battery holder. Includes files for 4, 3, 2 and 1 battery holders. 4 place holder is 311mm x 23mm overall. No supports needed. Print on edge as pictured. Edit: Added versions with holes 40mm apart and labels. Tool holder…
Enhance your Makita tool setup with this LXT-compatible Belt Hook Clip , available in two versions: Slim (fits up to 7mm belt & trouser thickness) and Original (fits up to 11mm thickness, matching the original Makita belt clip). Both…
Please, note that battery case protrudes beyond the holder. Add distance between back of the holder and the wall. Also add space for your fingers. Mounting to standard 16mm chipboard can be made with 4x20mm screws.
This 3D printable Makita LXT 18V Battery Terminal is a remixed version of two existing designs, featuring several enhancements for improved usability and compatibility: 3-pin compatibility: Expanded to accommodate 3-pin configurations,…
Convert your Parkside X20V Team batteries for use in Makita LXT tools with this complete, user-friendly adapter solution . Why This Adapter? Unlike other designs, this complete adapter solution is tailored for seamless assembly, enhanced…
I used these Adapters: https://de.aliexpress.com/item/1005004578692099.html?spm=a2g0o.order_list.order_list_main.17.152d5c5fdXJg98&gatewayAdapt=glo2deu If your bike does not have a 32mm frame, feel free to use the .step file to adjust.…
You got to be a bit creative for this one, You need some M4 30mm bolts Switch ( i used a 20mm build-in 2 way switch ) Makita connector , ebay .. a old machine or dyi Truck work light 12-36V ( M8 mount ) its the stock size And some hot…
Mounts for Makita 18V/14.4V LXT battery and tools. Loose fit, easy to mount and unmount. Printed in PLA. Other plastics may have a different shrinkage rate, so model adjustments may be needed. Print instructions Rafts: No Supports: Yes…
Only requires 1g of support Around 45g of filament (with support) Infill: 15% Wall loops: 3 Print at a 30-degree angle, as shown on the attached screenshot Manually draw normal support, as shown on the attached screenshot Use " 13 mm…
Adapter allows dust collection hose with Quick Click style connector to be attached to the Makita 6 ½ in circular saw (LXT 18v). Requires the OEM Makita adapter as shown on photos (black part is OEM from Makita - dark grey is 3D printed…
This 3D-printed design enables you to extend the reach of your Makita LXT battery by connecting the chainsaw to the battery through a durable extension cord. Ideal for use with tools like the SawLink series or any application where the…
This adapter gives my old cordless screwdriver a new live ;-). The 16.8V battery pack was broken and I did not want to invest in NiMH adapter anymore. But as I use Makita LXT 18V system, I bought a cheap adapter at…
Drill/Screw bits holder for Makita LXT DTD155/DHP483 and maybe other Makita tools. Includes holes for 6x2mm magnets. Holes should be tight enough but you can always add some glue to make sure they stay in place. OpenSCAD source code…
read front locking instructions as described in Makita LXT Battery Holder for Multiboard - T-bolt locked rear locking instruction (same as i posted in comment in Multiboard - Makita Battery Holder ): you can use a 10 mm Mid Thread, Flat…
Makita Die Grinder Wrench Holder A wrench holder for the Makita Cordless LXT Die Grinder (DGD800) and its two 13mm collet wrenches. This is a wrench holder for the two 13mm wrenches that came with the Makita LXT Die Grinder (DGD800),…
Makita battery holder for four batteries. Works with 18V (LXT) batteries and 40V Max (XGT) batteries. A remix of Jerry's single holder. Supports only required from the built plate to support the joint tags. It can be done without supports…
I print these in PETG and/or PLA Layer Height: 0.3 Line Width: 0.6 Supports = YES (normal)
PETG is suggested for the holder. Spacer can be PLA Layer Height: 0.3 Line Width: 0.6 Supports = Yes and No (No if you print the flatback version)
This rugged 3D-printed clasp is built for Makita 18V LXT batteries. Whether you're organizing your shop, tool trailer, or mobile setup, this mount locks your batteries in with a satisfying snap. Designed for secure storage and quick…
Makita DML800 18V LXT Lithium-Ion Cordless LED Headlamp hanger, wall mounted holder, labelled with DML800. Two versions, horizontal and vertical. Attach with two number six screws. Print as pictured. No supports needed. Battery Holder…
Clip to hold two Makita LXT 18v batteries. Useful for carrying batteries around, keeping them together as a set for 36v equipment like the chainsaw and protecting the electrical contacts Nice aspects in this design: Breakable supports are…
A Makita LXT powered floodlight using a lamp from Nilight https://www.nilight.com/collections/led-light-bar/products/nilight-4-inch-18w-1260lm-spot-led-light-bar-4-pcs?variant=26244044553 Holes are sized for ~M5 nuts and machine screws or…
Makita LXT charger wallmount Charger locks in place and is robust. M5 size holes in baseplate. M3 screw can be used to assembly holder. But it is not obligatory to use when installing holder to wall. Sides has little groove that need to…
+++ IMPROVED VERSION: https://www.printables.com/de/model/409700 +++ This is my attempt so build a portable soldering station for the makita LXT 18V battery environment. You will need the following parts: KSGER STM32 OLED V2.01…
Makita LXT Battery to CXT Tool 18V Battery on 12V tool *** you are over volting your tool *** Extra requirements 2 x 9.5mm male spade terminals 3 x female fuse terminal 2 x M3 10mm bolt 2 x M3 nut 12k ohm resistor between negative and…
You need to print a multiconnect mount for connecting to the grid. Select Multiconnect for openGrid > BETA openGrid Multiconnect Lock Snap and openGrid Foldable Multiconnect for printing. Installation requires two grid cells , as the…
Cordless tool battery adapter. Skil PWRCORE 20 Battery to Makita skins Extra hardware wire 9mm female fuse terminal x2 female fuse terminal x1 6mm male spade connector x2 M3 x10mm bolt & Hex nut Assembly should be self explanatory, reach…
This bin is designed specifically to hold the Makita LXT LED Flashlight (DML817) for Zach Freedman's Gridfinity system. There is a slot for the included orange diffuser, and the flashlight still fits in the bin even with the diffuser…
Cordless tool battery adapter. Bosch (blue) Battery to Makita skins Extra hardware wire 9mm female fuse terminal x2 female fuse terminal x1 6mm male spade connector x2 M3 x10mm bolt & Hex nut Assembly should be self explanatory, reach out…
This is a Remix of an original Model by Wiseone. For a detailed description please see the original Model. The only change to the original model is an added cutout to be compatible with the Makita 644808-8 spare part as contacts instead…
Remix of great model from user Wiseone: https://www.printables.com/@Wiseone , see their description for more info: Did some adjustments to be able to use it wallmounted with a cable connected to some led lights. Added space for cables,…
Description This is a fully 3D printable handheld vacuum cleaner , designed as a compact and modular DIY solution. The design integrates a 50 mm brushless motor , filter system, and a detachable dust collector, all housed in a clean,…
I built the "Open Battery Information" arduino connector for resetting locked Makita LXT Batteries. It can also unlock batteries if the cells are ok. - See video of @Well Done Tips! https://github.com/mnh-jansson/open-battery-information…
Version for installing a module MH-KC24-2 with 2 USB ports, two switch sizes to choose from. To mount the module, use 4 screw M3x5mm.
Simple portable benchtop power supply based on Riden RK6006 and Makita battery holder by Wiseone For assembly, you need 1x Makita terminal spare part, no 643852-2 1x Riden RK6006 power supply 1x ordinary rocker switch (for example this or…
Makita LXT Battery to Bosch blue tool Extra requirements 2 x 9.5mm male spade terminals 4 x female fuse terminal, 2 types 5 x M3 10mm bolt 1 x M3 30mm bolt 6 x M3 nut 1 x spring ~5mm x 10mm 1 x 10k ohm resistor - negative to centre…
This allows you to mount 2 Makita LXT batteries against the wall or you could glue it inside a storage box. I printed it lying down, which was a bit of a pain to remove the supports. You may have better luck when printing it standing.…
If you've ever wanted to make use of those Makita LxT 18V batteries for non-Makita projects, you are going to want a solid and clean way to get to the battery terminals. This 3D print provides a plastic plate that slips onto the battery,…
Here's a way to keep your Makita LXT 18V batteries organised and out of the way. My battery mount allows you to locate your Makita batteries in spare space, like under shelves, for example. The mount allows the Makita LXT battery to…
Mounts for Makita 18V/14.4V LXT battery and tools. Loose fit, easy to mount and unmount. Printed in PLA. Other plastics may have a different shrinkage rate, so model adjustments may be needed. Print instructions Rafts: No Supports: Yes…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** For Makita LXT 18V Tools only: This is a tool holster and organizer designed for…
With this little thing you can keep 12 or more hex bits in a very practical way on the Makita LXT series tools. I've been using this for over a year and has performed flawlessly so I'm confident to publish it now :) It uses embedded…
MAKITA 8391DWPE PA18 18V Drill to LXT Adaptor After many, many revisions I've finally got a version that I'm happy with. This will allow you to use the newer LXT (Li-ion) batteries with an older PA18 (Ni-Cd) Makita drill. I used a cheap…
New Version Available Why should I print this ? This is a remixed version of "Smoother Makita LXT USB Charger". I closed one of the USB holes and made it taller to accomodate for my USB stepdown converter. I tweaked it in Freecad from the…
Adapter a Fein vacuum to a Makita LXT Router. Probably works with festool vac too. Probably works with other Makita trim routers too. All probably :) The Fusion 360 file included has a parameter "wall" which is 2mm in this print/model,…
I took David's original model and modifed it by mirroring the side without the extra connection, ie just a 2x holder version. This suited my needs as I have a space where I can fit 2wide and several below, and wanted the softer edges on…
Ursprüngliche Idee war die mobile Stromversorgung meines TS101 Lötkolbens mittels 18V LXT-Maikta-Akkus, wovon ich mehrere besitze. Geendet ist das ganze dann in diesem Projekt. Ein mobiles Laborletzteil mit mehreren Spannungsausgängen und…
This is my second attempt so build a portable soldering station for the makita LXT 18V battery environment. I improved the old version a little bit. It's still not perfect, but it works for me. There are some new features: ON/Off switch…
I added a step of the whole thing, if you need to improve/modify it. You will need the following parts: Makita Terminal Adapter (Search for Makita Terminal Adapter on AliExpress) OR: https://www.printables.com/de/model/200596 80W 5A WiFi…
If you've ever wanted to make use of those Makita LXT 18V batteries, you are going to want a solid and clean way to get to the battery terminals. This 3D print provides a plastic plate that slips onto the battery, snapping on just like a…
Makita 18V 4 place battery holder. Includes files for 4, 3, 2 and 1 battery holders. 4 place holder is 311mm x 23mm overall. No supports needed. Print on edge as pictured. Edit: Added versions with holes 40mm apart and labels. Tool holder…
There are many Makita LXT 18-volt battery holders…. this one is different! All the other holders you will see out there are unidirectional. You can only slide the battery on from one side. This one allows you to slide the battery on from…
A remix of Cmarlow bit holder adapted to 6x3mm magnets which were esier to get for me. Also a few changes compared to original design to improve on design: Reduced depth of holes in which bits go, magnets are strong enough to hold them in…
A remix of mgx bit holder adapted to 6x3mm metric magnets. Also made bit holes a bit more shallow so its easier to pull bits out. Requires 12x 6x3mm (2 for each hole) cylinder magnets. Magnet holes are tight enough that no glue is needed…
Makita LXT 18V battery to Parkside x20 tool adapter. If you include a locking part and then screw together top and bottom parts the adapter is fixed to the tool. Makita battery is always detachable. Bottom part uses original Makita…
I printed this with PETG to help make the part that clips into the walkie more flexible but PLA should work fine too
Fixed adapter from Makita batteries to Ferrex tools. The shape is specifically designed for hand 5W LED light. Contacts for battery are from aliexpres. The tolerances are low, so the contact block fits snug in the place. Between minus (-)…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** For Makita LXT 18V Power Driver Tools with Belt Hooks.…
Makita LXT 18V battery mounting bracket ideal for mounting your batteries to the wall. I printed with the surface that will go on the wall on the bed of my 3D-printer. 3D PRINTING SETTINGS Layer height: 0,2mm Infill: 10% Support enabled…
Makita LXT series battery holder for Element system pegboard - 2 hook on the backside. You can use for all type of LXT series battery. Preferred print material ABS/PETG for massive construction, possible print without any support.
We sell printed units, please contact us : [email protected] or visit our website/webshop: http://www.ytsio.nl Keep your workshop tidy with these battery holders. I print them with PETG; 4 wall; 6 top/bottom; 25% Gyroid infill. These…
We sell printed units, please contact us : [email protected] or visit our website/webshop: http://www.ytsio.nl Keep your workshop tidy with these battery holders. I print them with PETG; 4 wall; 6 top/bottom; 25% Gyroid infill. These…
We sell printed units, please contact us : [email protected] or visit our website/webshop: http://www.ytsio.nl Keep your workshop tidy with these toolmounts. I print them with PETG; 4 wall; 6 top/bottom; 25% Gyroid infill.
I didn't like any of the lights available from Makita and didn't want to start down a whole different battery family in order to find one that I did like. I've also tried many of the various lights with built in batteries and have been…
Makita LXT Wallmount. Big thanks to GPlatek for the battery mounts: https://www.thingiverse.com/thing:352094 Print Settings Printer: Anet A6 Rafts: No Supports: No Resolution: 0.15 Infill: 10 Notes: I did this at 0.15 resolution and 10%…
Eine Polsterdüse für den Makita Akkustaubsauger DCL 180 / 181 / 182. Passt wahrscheinlich auch für die anderen ähnlichen Typen - sagt es mir bitte. Kann ohne Support gedruckt werden.…
Here is a project to build a 12V power adapter, powered by Makita LxT 18V batteries. All the components and modules fit into a 3D printed case. The 3D printed case consists of two parts, a battery plate and a case cover. The case is…
Designed for Makita DHP482 drill and DTD152 impact driver. Will probably fit many other Makita tools and others, 64mm inside diameter. Added several more sizes to fit bigger tools: 68mm, 72mm, 76mm. Added a 72mm “square” holder to…
