1 / 1
Makita LXT double bit holder with metric 6x3mm magnets for drill/drivers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of compact bits holder for Makita LXT tools adjusted for metric magnets.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 684
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (34)Powiązane
A remix of mgx bit holder adapted to 6x3mm metric magnets. Also made bit holes a bit more shallow so its easier to pull bits out.
Requires 12x 6x3mm (2 for each hole) cylinder magnets. Magnet holes are tight enough that no glue is needed if you push magnets in.
Recommend printing with 100% infill max 0.2mm layer for robustness. May require supports depending on print orientation.