1 / 2
Improved Bi-Directional Makita 18v LXT Battery Holder — zdjęcie 1
1 / 2

Improved Bi-Directional Makita 18v LXT Battery Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Improved Bi-Directional Makita 18v LXT Battery Holder that allows you to slide the battery into place from either side

Ocena
5 / 5
Polubienia
19
Pobrania
128
Wydruki
1
Wyświetlenia
442
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

There are many Makita LXT 18-volt battery holders…. this one is different!

All the other holders you will see out there are unidirectional.  You can only slide the battery on from one side.  This one allows you to slide the battery on from either direction, which accomplishes two things:

  1. It allows you to easily see which batteries are “full” vs. which ones are “used” by always sliding the full ones on from one direction, and the used ones from the other.
  2. It allows you to not have to worry about turning the battery around to align it as much.

Other advantages of this holder are that it allows for very solid mounting via 5 separate holes, and also uses a little less plastic than many of the wrap-around “box” style ones out there. 

Recommended Print Info:

  • This can be printed in PLA, but I recommend ASA or PETG (or something even stronger with CF) if you intend to use it a lot.  PLA is just too brittle to take workshop levels of abuse.
  • Use at least 5-6 perimeters and 100% infill if you want it to be as durable as possible.

As good as it is, I'm always looking to make things better, so please comment and leave me suggestions if you like this and want to see improvements!  I also highly support remixes so I have included the f3d and step files. I'd love to see what you come up with based on this design!

Tagi