Liczymy pasujące modele…
For the most up-to-date version of this design, check out the Makerworld version. It's the original threaded dragon egg, great for Easter egg hunts, gifts, and Game of Thrones fans. This is my made-from-scratch design from 2022 that has…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Improved version of the 3D Pull Copter Finger Ring with a different rotor design. NOTE: Models not compatible with original design Features: Improved rotor design (bigger and angled differently) Somewhat longer key for easier use Uses M3…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
Accurately bending leads on radial, through-hole components like capacitors and resistors has never been this fun! :D Inspired by the fancy tools used by the talented Marco Reps in his GPS Nixie Clock video , I modeled a Biegelehre from…
Wydruk około 3,90 €–4,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I didn't like how the drawers fell right out. I'd prefer some catch, and since the top goes on separately, it's a perfect opportunity to do something like this! Version 2: The one where I actually apply volumes and remove the duplicate…
Wydruk około 1,40 €–1,72 € nettoWstępna wycena jednego wariantu
2026-04-17 Update: The connections have been modified to improve tolerances between multiple pieces. This file is an improved version of the growth chart template I previously made to create a "growth chart," like the ones that people…
Wydruk około 3,87 €–4,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 2025-10-21: After using the corkscrew for a few months I found that the small/short support is not robust enough. It bends too quickly. That is why I modified the bigger support so it gives more hold to the small one. Have a look…
Wydruk około 2,21 €–2,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design improves the original Bambu Lab reusable spool holder in the following ways: Allows you to see how much filament is left on the spool and uses less filament to print the spool due to the hexagon pattern on the sides. Also, the…
Print, assemble and play directly, no screws needed 8-11
Introduction How to read: The current hour points to the current minute. This is a rework of the wandering hour clock by clockspot : https://www.printables.com/model/69885-wandering-hour-clock I changed the mechanism, they did the concept…
To support me the most, please download from MakerWorld Link: https://makerworld.com/en/models/170277#profileId-186972 Hate having to use a plyers to remove the bit? Well no longer. This remix has relief cuts on all the corners meaning…
I took David6722's genious OTF Design and tweaked it a bit, I added places for screws, a pocket clip, altered the button and made a few more improvements. Prints very easily but may need some supports on the newly created overhangs. Print…
I was frustrated by the need to re-attach the screws to the standard Creality bracket whenever I need to run input shaping with my Sonic Pad. So I created a version which simply slots in (firmly) to a semi-permanent bracket on the…
This is a remix of falangy's bunny ring holder with an improved tray to fix an overhang issue. I’ve also set the bunny back from the center of the tray I have a few other similar remixes: Cute bunny (you are here) Sleepy fox Dancing fox…
This is just an improved Printer Profile and Print Settings for the Kobra S1 that increases printing speeds significantly, while not loosing out on quality. I have increased the max speeds for the motion limits of the printer as well as…
Magnetic Gunstock for Oculus Quest 2 (Improved & Simplified) After printing three of these for friends I decided to improve a few issues I found and greatly simplify the process for others. Most of the source models have disparate and…
Spooky spider fridge magnet If you like it --> press like it :-) Here a model of the famous spider model from Jason C Kessler. I´ve added two sockets for magnets 5x3mm. Just make a pause at the top of the installation space(look before in…
Bolt on replacement blade guards for the Luba What are the benefits of this design over the original stock part? Stops grass pancakes getting stuck on top of the guard causing causing issues with lift motors retracting Makes cleaning a…
This is a remix of a remix of the excellent deburring tool case originally created by morleykert . This case fits a 150mm length tool from tip of blade to end of handle. Handle width is 15mm across (widest) edge of the hex handle. It fits…
I designed this Colt 1911 replica that is roughly the correct size if you like this please give it a like! EDIT_1: VERSION 22 is much better! it has thicker scales, and other small improvements. This prints well with if you turn it so it…
Update 6/16/25: New cosmetic improvements! Dormer now uses inserts so color can match house color. Dormer inserts slide straight up into the dormer roof and are held in place by the wall below (see photo). Made the mortise and tenons…
Don't forget to hit the like button if this helps you :) Improved calibration prints with minor modification to connect all the printed squares for easy removal from the bed. (uses a 0.4mm line width) These prints work seamlessly with the…
This is a remix of the original variable pitch propeller mechanism designed by Chris B. After printing and assembling the original model, I decided to make several small mechanical improvements to improve the strength, rigidity, movement,…
I remixed lilfonzy's Low-Voltage Bracket to make the arms stronger. I printed out his version and the arms were far too flimsy and broke quite easily. In this version the arms are an order of magnitude stronger and don't interfere with…
This is a parametric case for the Pixel 7 designed in CadQuery. Although designed for the non-pro version of the Pixel 7, one could conceivably modify the dimensions to fit the Pro. There are a few Pixel 7 cases already so what sets this…
I improved the design to use threaded inserts, added a knob, and uploaded STEP files
~ ~ ~ 🇬🇧 English ~ ~ ~ This is an improved model to the already existing Stabilo Boss holder - for 3 up to 26 pcs Holder for Stabilo Boss highlighters, from 2 pieces up to 26 pieces. From two to 13 pieces it's a one-row design, from two…
An Improved Broadhead box. The lid is a friction fit so your tolerances need to be dialed in. DO NOT close the all the way when empty you will not be able to open it again. EDIT: I added 2 new lids v2 that have finger cutouts to make it…
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is an…
Previously I posted a config file for use with print SPLA : https://www.prusaprinters.org/prints/65005-spla-print-parameter-test-and-config-file While that configuration file works, it did have some problems with stringing. With more…
Small redesign of ICant3DPrint exceptional Improved Mitre Cutting Box . The length is now suited to print on a 20x20cm bed like the Prusa Mk4's. This also decrease print time and filament usage. The model in the pictures is printed with a…
I made some minor changes to the original Percussion caps, these are a little longer, and a tiny bit smaller in diameter and are also designed with 2 walls vs the 1 wall of the original. These will fit a bit tighter onto a #10 Percussion…
Made the springs solid pieces to 1, stop them from slipping off the arms, and 2, to add a lot more tension to the catapult when its cocked back. Still playing around with the infill but currently its at 20% and this thing is incredible!…
Had one of the springy parts of the "middle-section" break and noticed it was designed with sharp 90 degree cuts at the weakest point(which is where it snapped). So I added fillets to hopefully improve longevity of the part. I also cut a…
Improved tracks with links consisting of 2 perimeters instead of 1.
An improved version of my previous Eagle. All straightened and a socket added at the bottom for a 1" pole. Previous version:
Improved clips for fermentation band
This design was modified to accommodate a redesign I performed on the original intended model. The original design was modified to allow for larger fasteners and embedded nut options to ensure rigidity. This design was updated to reflect…
Modified version of the original bait hopper for the V020 bait boat. ✅ Inner shape redesigned to prevent bait from getting stuck during release. ✅ Fully compatible with the original mounting system. ✅ Rounded curves adjusted for better…
A cap for Parker Vector fountain pen. Should work well both with the printed body (from the original model) and with original Parker Vector bodies. Should snap easy and firmly. Print instructions: When using Prusa Slicer I got best…
Important notice Ansi Frame are obsolete. I'm working on the improved version. Materials Framework Computer Mainboard HDMI expansion card usb expansion card 1N4148 Diodes Switches Keycaps or print its Stabs - Cherry MX Style Stabilizers…
This is an alternative Quick Release for the MK4's xLCD in combination with the Original Prusa Enclosure. It is a remix of an idea originally posted in the form by the user @ssmith . When installing an MK4 printer in an Original Prusa…
The method of connecting the nested wire elements to the antenna spreaders is poor, so I designed these alternative hangers. One for each corner of each element.
This is a more elaborate version of thing https://www.thingiverse.com/thing:3382580 , using the same technology as the other Zuse inspired parts. A 3 to 8 decoder could be created with a collection of AND amd/or OR gates, but this would…
I added some more vent holes as I am going to use a 7880 card and will need as much cooling as i can get!
I have updated/improved the HackberryPi lower casing. ⠀ Modifications: • Closed up the miscellaneous hole at the bottom in-between the charging port and the power switch • Removed the logo located on the back of the chassis for a cleaner…
This model is an improvement on the foam insert that comes with the CORE One Advanced Filtration System. I'm calling this foam piece the "gasket adapter" because it seems to try to adapt the non-uniform surface of the blower to the flat…
Standalone case and optional display stand for use with a framework 16 mainboard and display. The display stand utilizes the built-in mounting points on the display, enabling simple but sturdy mounting. The original mainboard case model…
i did print it and test just too lazy to take picture and upload
it can hold 7 samples that are ≈ 1 cm in diamater and ≈ 4.5 cm in height. This version doesn't have a double sided version saly because i had issues making it print well on the bottom side.
This version was could be printed in ASA , making it super tough and perfectly suited for the job. I personally use it with my boxing gloves , and it performs great! I'd love to see how you use it — so go ahead, print it, test it out, and…
My thumb sticks were both looking pretty sad due to wear. Instead of ordering new ones, I made these from TPU and they feel great. They fit on my PowerA controller, but they also fit well on a couple of other controllers I have laying…
Chain/shell link for the Buzzbee Belt Blaster. By removing the weird airflow restrictions and making the shell into a proper ‘barrel’, it improves fps dramatically without having to change anything internally. Shells are cross compatible…
This is my design for an improved axle and accompanying parts. 3rd and 4th photos are the aftermath of the old parts and why I made new ones. Feel free to email me [email protected] or message me if you have any questions or…
Expanded minifig tray plus a new box to fit new heoes from 1st and 3rd DLC, designed a new hero card holder to fit all heroes with sleeves, expanded card holder to fit all new cards with sleeves and still plenty of room for new ones,…
A much better version of the shoe clips I uploaded a while ago, these do not require you to attach them to a set of rubber snow cleats and can be clipped to your shoes directly. I wear size 11 so these clips are sized to me.…
Better bolt gripping with square S3 bit instead of coin slot Extended from 9.5mm to 16mm to better secure my 10mm thick tool holders Check out the rest of my custom collection
When I bought my first 3D printer, I wasn't sure whether or not a new hobby would suit me. I didn't want to spend a ton of money on something I wasn't sure what kind of use I'd get out of, but I wanted something large enough for printing…
This is an improved version of jetty's Yet Another Dial Indicator for Replicator. The improvements are: Magnets are inserted from the top instead of the bottom. This eliminates the need to glue them in and stops them pulling themselves…
boat powered by a balloon
the missing files can be found in the original model
I had a broken Preh ME5A switch which would no longer correctly lock into the switched on state. Luckily this video by DIY Chris existed, which explained the issue and offered a solution. The little plate with a peg, which is responsible…
I have improved the model by adding stronger hooks that do not need supports. I have also added some stops that prevent the Mac from rising when the power button is pressed. *To insert the Mac mini into the stand it must be done…
A modified version of the model uploaded by rpgweb_101633. I made the cutout wider, so that there is no overhang, when the model is printed on its side (see the second picture). Printing the model on its side is preferable in my opinion,…
This upgraded idler stack is designed specifically for the Modix X-axis and offers significant improvements in durability and stability compared to the original design. You can find the product here. UPDATE 10. June 2025 Added a spacer…
Body: 15% infill with 0.4 nozzle, 0.2 first layer, 3 base layers to 0.6mm all other layers at 0.16 Collapsing Core: no infill with 0.4mm nozzle, 0.2 first layer, 3 base layers to 0.6mm all other layers at 0.12
Based on the idea of Train Whistle Mouth Piece by MJ , the mouthpiece aims to improve airflow and direct the air to the four whistles from Train Whistle . Features No supports required ✨ Improved airflow 💨 Print Ensure good adhesion :…
Based on the FlexiRex improved, this variant is getting ready for St. Patrick’s Day. In addition to the normal Rex the model also has a Jaunty Hat, some terrible facial hair and is holding a very large beverage. Impressively given the…
I had to very slightly increase the size of the circuit board mounting holes, just using a drill bit by hand, to get the board to drop into the bottom of the case. I printed with PLA and have had no heat issues running the circuit board…
I printed it with 0.16 mm Layer height. No supports needed. You may need to add a brim to prevent the pieces from falling over.
This is a cover design for the electronics box of the Prusa Mini or Mini+ loosely based on a design by @thefreewheeler (see here: Prusa MINI Z-Top | Electronics Box Lid ) , which attaches like the original Cover Plate. It gives the…
A replacement frame for the Hario Skerton Plus coffee grinder with improved shaft design for a more uniform grind. As this is a direct replacement of the original frame, no other parts are required. The center hole has a thread to allow…
Fusion 360 file provided so you can make edits, apologies for how unoptimized it may be. have fun EDIT* I also made it in solidworks. Yea i bought a solidworks license so i could learn solidworks. i want to get hired and they may want me…
********* UPDATE 28th March 2026 ******** New nozzle design that has a cone inside the threaded hole that punctures the glue tube and seals around the glue collar. This means no more glue leaking from the threads ... now makes a perfect…
Ever had your towel slip off the hook and onto the floor? This towel holder's wedge shape solves that problem. It gently pinches the towel in place, so it stays put until you're ready to use it. There are 2 versions of the holder: For…
The cotton swab dispenser provided here is an improved version of an initial design that only had a top lid. Refilling it with cotton swabs was therefore quite challenging. For this reason, I developed an improved version with a removable…
Trim tabs for a Seadoo X4 hull. These reduce proposing at speed, make the hull much more stable. The two hafts lock together with the center “bow tie” and some epoxy. Enjoy riding!
The inner section of the dome is modified to improve printability
This version was could be printed in ASA , making it super tough and perfectly suited for the job. I personally use it with my boxing gloves , and it performs great! I'd love to see how you use it — so go ahead, print it, test it out, and…
This is a wheel that is far superior than any wheel. It wheels a lot better than other wheels. Wheel better. Wheel good.
Use same printing as recomended by the original. Remixed in Autodesk Fusion.
This is a Cordmate II flat elbow to connect chennels at a flat 90 degree angle. The ones provide in the kit are incredibly loose, dangle, and fall. I have channels on my garage ceiling for my LED lights and it looked janky with dangling…
I printed the drawers from the original model, but the walls were too thin and kept breaking. So, I redesigned them with thicker walls and added more variants with dividers.
Update 2026-02-16 The ABS has completely disintegrated. I printed another set in PETG as a bandaid, but don't expect those to last long. Once those fail, I'll try MJF (nylon). And after that, maybe try a mold + silicone? ASA also…
I printed with 3 walls and 15% infill, just to make it strong enough to last long.
Standalone case and optional display stand for use with a framework 16 mainboard and display. The display stand utilizes the built-in mounting points on the display, enabling simple but sturdy mounting. The original mainboard case model…
Tato rozevírací forma na vosí hnízda (šišky) je vylepšená verze mého původního autorského modelu , který vznikl před několika lety kdy jsem dostal nápad jak udělat vánočnější "vosí hnízdo"a šiška mi přišla ideální dekorace i tvarově…
Update 2/16/26: For AAA batteries, change the battery_diameter parameter to 10.8 mm and the hei to 46.5 mm Update 1/4/26: Fixed the hinge problem Change the b_x and b_y parameters to change the number of batteries
This is part replaces cardboard part from alchemist character from board game Merchants Cove. - Printed at 0.10 layers so the curves look good (0.20 if you don't mind the look too much) - No Support - Optional: Ironing - Any material, I…
This print allows you to unlock the corner of your Centauri Carbon's print bed, by creating a removeable sturdy post that allows you to cut your filament automatically, and print in the corner without obstructing the filament cutter…
i printed with pla+ and with the ramp facing up
This is an updated add-on for my K2 Plus Ventilation System, which you can find here: The new Poopchute v2 features a redesigned funnel with a larger opening to reduce the risk of clogging, along with a completely new mounting system for…
This Improved Coupler Nut is a remix of the Coupler Nut from @GunplaMark 's The Ultimate Cereal Container Filament Drybox that now includes PC4-M10 Threads and a Flange for a perfect, secure fit with the PC4-M10 PTFE tube coupler. I used…
Corner Conversion Pieces – Designed to turn standard honeycomb panels into a functional corner layout. Attaches from the back. Interlocking Corner Fillers – Fills gaps and creates a clean, continuous honeycomb pattern Bordered 211x248…
The default sock for this hotend wasn't really doing its job, so I made a thicker one that covers a little better. You'll need red silicone RTV/gasket sealer for this. I suggest printing out of PETG at 0.3mm layer height, washing with…
As the Tronxy XY-2 Pro uses 3mm bed screws, and they're so close to the corners of the bed, I couldn't fit the bed leveling knobs I use on most of my Cartesian style bedslingers. Wanting a similar look and feel to my other machines, I…
This is a new stock for the protean by Flygonial. I had issues with the short stock so I designed a new version. The main upgrades are: Top battery door with thumbscrew, Heat set inserts for screws. Secure mount of the butt plate.…
![Colt 1911 Replica prop [IMPROVED AND UPDATED] (Designed from scratch)](https://media.printables.com/media/prints/682107/images/5359823_dcc53a32-e6f6-4a88-a468-582fdfd198ad_3ca5a631-9251-4d12-81fc-f5624b52233e/large_display_8123d645-d300-4929-945e-c84d2d032276.webp)
![Train Whistle - Improved Airflow [remix]](https://media.printables.com/media/prints/1153582/images/8703587_ab402d98-52b4-42c7-869d-b51983395d24_f020e1eb-b99f-4928-a666-87bbe62c6de2/20250118_152138v2.png)
