1 / 3
Makita LXT multiboard battery holder (bolted from front and back)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the idea of bolting the battery holder from both front and back
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 2
- Wyświetlenia
- 254
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
read front locking instructions as described in Makita LXT Battery Holder for Multiboard - T-bolt locked
rear locking instruction (same as i posted in comment in Multiboard - Makita Battery Holder):
you can use a 10 mm Mid Thread, Flat Head, T-Bolt from multiboard.io (https://thangs.com/designer/Multiboard/3d-model/10%2520mm%2520Mid%2520Thread%252C%2520Flat%2520Head%252C%2520T-Bolt-974085) and it screws from the back of the multiboard into the snap
this way you have a double-locked battery holder!
