1 / 2
Makita LXT bit holder with 6x3mm magnets for drill/drivers — zdjęcie 1
1 / 2

Makita LXT bit holder with 6x3mm magnets for drill/drivers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A remix of bit holder but with 6x3mm magnets and better fitting to the tool.

Ocena
5 / 5
Polubienia
51
Pobrania
316
Wydruki
6
Wyświetlenia
1283
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A remix of Cmarlow bit holder adapted to 6x3mm magnets which were esier to get for me. Also a few changes compared to original design to improve on design:

  • Reduced depth of holes in which bits go, magnets are strong enough to hold them in place. Making them more shallow makes it easier to grab on to them and pull them out.
  • Modified the part of bit holder which fits into the edging/instet on the tool so it has the same trapezoid shaped cross section. This imakes bit holder fit into tool more nicely and makes it more stable when attached.

Requires 6x 6x3mm cylinder magnets. Magnet holes are tight enough that no glue is needed if you push magnets in.

Recommend printing with 100% infill max 0.2mm layer for robustness. May require supports to print in position as in the realisation photo.

If you want a left sided version simply flip it/mirror in slicer.

Tagi