Fein to Makita LXT Router Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter a Fein vacuum to a Makita LXT Router. Probably works with festool vac too.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 780
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Adapter a Fein vacuum to a Makita LXT Router. Probably works with festool vac too. Probably works with other Makita trim routers too. All probably :)
The Fusion 360 file included has a parameter "wall" which is 2mm in this print/model, but can be adjusted by just changing the parameter for your needs.
Probably not stable enough to be used on an edge, the vac is pretty heavy (though I often hang the hose from the ceiling), but works well on flat surfaces.
Both nozzles are slightly tapered to match their respective ends and makes for a quite tight fit.
Print instructions
The pictured one was printed in resin, but this should print totally fine just sitting on the bed in FDM, no supports etc required.