Fein to Makita LXT Router Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter a Fein vacuum to a Makita LXT Router. Probably works with festool vac too.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 79
- Makes
- 1
- Views
- 780
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Adapter a Fein vacuum to a Makita LXT Router. Probably works with festool vac too. Probably works with other Makita trim routers too. All probably :)
The Fusion 360 file included has a parameter "wall" which is 2mm in this print/model, but can be adjusted by just changing the parameter for your needs.
Probably not stable enough to be used on an edge, the vac is pretty heavy (though I often hang the hose from the ceiling), but works well on flat surfaces.
Both nozzles are slightly tapered to match their respective ends and makes for a quite tight fit.
Print instructions
The pictured one was printed in resin, but this should print totally fine just sitting on the bed in FDM, no supports etc required.