Somfy RC cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a backplate for the Somfy Smoove Origin RTS remote controller.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
This model is a backplate for the Somfy Smoove Origin RTS remote controller.
It has been created thanks to the “PetitPhoenix” Electric support plate from Cult3D.
I use his model as reference to create the inner fixation.
The backplate is a littlebit ( almost imperceptible ) floppy.
I use an Ender3V2 with 0.4 nozzle to print the model.
| Print settings | ( Cura 5.10.0 ) | ||||||
| Quality | Walls | Top / Btm | Infill | Material | Speed | Supports | Build Plate Adhesion |
| LH : 0.1 | WLC : 2 | Ironing : True | ID : 25% | 1.75 PLA, 215°C | PS : 120mm/s | TREE | Brim |
| ILH : 0.2 | PTW : True | Patern : ZigZag | Patern : Cubic | WS : 70mm/s | SOA : 60° | BLC : 4 | |
| LW : 0.4 | ZSA : Sharpest Corner | SPDensity : 8% | Smart Brim : True |
The blender files are shared but the piece needs to be patched with 3D Builder or other software after editing ( due to overlapping).
If someone of you knows how to avoid overlap with rotated array and mirror modifier, I am a taker ^^.
ENJOY!