MiSTer Multisystem2 Digital FPGA based retrogaming console enclosure

This is the MiSTer Multisystem2 Digital enclosure. 

For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support.

Please read the included PDF for advice on assembly and printing of the enclosure parts.

If you wish to purchase a Multisystem2 FPGA based Retrogaming console, please see our shop here - https://shop.heber.co.uk/mister-multisystem/

All parts are designed to be printed with a 0.4mm or 0.6mm nozzle and are currently 3D printed on our UK print farm using Prusa i3 MK4 and Core ONE 3D printers.

We print with Polymaker PolyTerra Charcoal black PLA (and other colours of PolyTerra). We recommend using this material for 3D printed electronics enclosures as it’s tough, has very high impact resistance, has a nice matte finish and comes with a sustainable cardboard spool. Also with every spool purchased you are planting a tree.

There is also technical information and a user manual over on https://multisystem.uk/

Multisystem2 is brought to you by Heber ltd and The Retro Collective. If you have any technical questions or need any advice on using the system, please do not hesitate to contact us - (contacts are via our shop shop.heber.co.uk)

The 3D printed enclosure was designed by Richard Horne (RichRap) for Heber Ltd. and The Retro Collective, you can contact Richard via the e-mail above, or follow on Twitter @RichRap3D or Bluesky - @richrap3d.bsky.social

Please feel free to use and change / modify these 3D models in whatever way you wish, you can 3D print and sell them with the commercial license we have used (CC-BY-SA), All we ask is that you mention us Heber & The Retro Collective (Attribution).

We also have two retrogaming museum’s based in Stroud, Gloucestershire (UK). If you wish to visit the Retro Cave or the Arcade Archive please see - https://www.retrocollective.co.uk/