1 / 4
Jonsbo N3 Front Dual 5V Noctua Fan Cover — zdjęcie 1
1 / 4

Jonsbo N3 Front Dual 5V Noctua Fan Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement drive bay cover for the Jonsbo n3 nas case that dropped my drive temps by at least 10c

Ocena
0 / 5
Polubienia
5
Pobrania
23
Wydruki
0
Wyświetlenia
583
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

I love my Jonsbo N3 nas case, but I could never get the drives below 51c even without the drive bay cover off. I decided to make my own cover with fans for improved cooling. For this I used 2 Noctua NF-A8 5V PWM, Premium Quiet Fan with USB Power Adaptor Cable, 4-Pin, 5V Version (80mm, Brown).

 

The fans didn't come with a way to plug them together into one output but I had a splitter from a previous noctua fan purchase that let me tie them into a single usb plug easily.

 

Other hardware used is 12 8 mm screws and 8 M3 x 5 x 4 mm brass threaded heat set inserts (Standard Voron inserts) and 4 6mm x 2mm round magnets to hold it in place. 

 

I repurposed and cut down the mesh filter from the original door to fit inside the cover. I left it loose and pinched between the grill covers and outside box so I can remove it to wash it when it gets dirty.

I originally shared this on Makerworld https://makerworld.com/en/models/1591723-jonsbo-n3-front-dual-5v-noctua-fan-cover?from=search#profileId-1676379

Tagi