2011 Mazda 3 center console tray replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This model replaces the portion of the center console tray that contains the 12V outlet. It adds holes for USB charging ports and a modular gap for a storage tray. The storage tray I modelled has spaces for pens/pencils and US quarters.
This is not a thorough tutorial or a ready-to-go product and is provided only as a starting point for any tinkering you want to do with this component of the car.
This project as I did it required these additional materials:
- USB charge board (I used a Coolgear Chargeit! USB-A/USB-C board)
- 2-4 M3 screws for mounting the board
- Epoxy for attaching the board mounting tray. This could be eliminated by printing as one piece.
- 12V outlet (salvaged from the stock tray)
- 2 ~20-gauge butt splice connectors
- Some 20-gauge wire
I spliced wires for the USB board onto the wires for the 12V outlet. This was tricky, they didn't leave a lot of extra wire to work with in there.
Printing:
- Use ABS or PETG if can interior will get hot - PLA can warp severely in heat.
Change log:
- v24: improved 12V plug fit