2011 Mazda 3 center console tray replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for the tray containing the 12V power outlet. Adds USB ports.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 0
- Views
- 532
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
This model replaces the portion of the center console tray that contains the 12V outlet. It adds holes for USB charging ports and a modular gap for a storage tray. The storage tray I modelled has spaces for pens/pencils and US quarters.
This is not a thorough tutorial or a ready-to-go product and is provided only as a starting point for any tinkering you want to do with this component of the car.
This project as I did it required these additional materials:
- USB charge board (I used a Coolgear Chargeit! USB-A/USB-C board)
- 2-4 M3 screws for mounting the board
- Epoxy for attaching the board mounting tray. This could be eliminated by printing as one piece.
- 12V outlet (salvaged from the stock tray)
- 2 ~20-gauge butt splice connectors
- Some 20-gauge wire
I spliced wires for the USB board onto the wires for the 12V outlet. This was tricky, they didn't leave a lot of extra wire to work with in there.
Printing:
- Use ABS or PETG if can interior will get hot - PLA can warp severely in heat.
Change log:
- v24: improved 12V plug fit