Freezer endcap (vendor/model unknown)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Why The freezer in our new house had a missing endcap covering the cooling ribs, which made shutting the drawers…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Why
The freezer in our new house had a missing endcap covering the cooling ribs, which made shutting the drawers difficult.
A quick design and 1 hour of printing later, it actually fit on the first try! Too bad I printed it in green filament and had to reprint it anyway in white....
"So why no make/model? Surely that might make searching for this part easier?"
it certainly would. Sadly I have no idea what kind of freezer we have. It's built-in and I can't be bothered to take the whole thing out of the kitchen cabinets just to check the label.
Features
- If your fridge looks like this, the part might fit!
Instructions
- If your bridging game is on-point, you can print this without supports.
- .2 to .25mm should be just fine
Open Source
As always the original design file (fusion360) is included, so feel free to improve it (or learn from it)!
Category: Kitchen & Dining