1 / 11
iFixit Mako Driver Kit Silica Gel Desiccant Holder — zdjęcie 1
1 / 11

iFixit Mako Driver Kit Silica Gel Desiccant Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small silica gel holder for the iFixit Mako Driver kit to help prevent moisture from causing rust.

Ocena
0 / 5
Polubienia
5
Pobrania
12
Wydruki
0
Wyświetlenia
126
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Two 6x3mm circular magnets are required and press fit. While filling it, make sure to lightly shake/tap the print to cause the silica gel to fully enter it. It is compatible with silica gel beads down to 0.8mm in size. I hope you enjoy the model!

Tagi