1 / 1
Besteckkasten für IKEA MAXIMERA 40x37 cutlery tray — zdjęcie 1

Besteckkasten für IKEA MAXIMERA 40x37 cutlery tray

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Besteckkasten für die kleinen IKEA METOD Küchenunterschränke - cutlery tray for the small IKEA METOD kitchen cabinets

Ocena
0 / 5
Polubienia
4
Pobrania
87
Wydruki
0
Wyświetlenia
601
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

English - see below

Besteckkasten für die kleinen 40x37 cm IKEA MAXIMERA Schubkästen. Leider gibt es von IKEA keine passenden Besteckkästen für diese Schubladen. Daher habe ich einen entworfen, der meinen Ansprüchen genügt. Insbesondere sollte der Horl Rollschleifer hineinpassen. Vielleicht findet jemand den Besteckkasten nützlich.

Ich konnte auf einem Ultimaker S5 drucken, daher musste ich den Kasten nur einmal schneiden (Ordner cut-large-printer). In zwei weiteren Ordnern sind Schnitte für kleinere Drucker. Das stl-File lässt sich ansonsten mit dem PrusaSlicer auf jeden Drucker anpassen. Es ist nicht erforderlich, die einzelnen Teile zusammenzukleben. Der Kasten passt genau in die Schublade wodurch die Einzelteile fixiert bleiben, insbesondere wenn Besteck darin liegt.

Meine Druckeinstellungen: PLA, 0,2mm Layer, 2mm Wandstärke so dass kein Infill entsteht

Falls Sie meine Dinge nützlich finden, können Sie erwägen, mir einen Kaffee zu spendieren. Aber Sie müssen natürlich nicht, meine Designs sind frei und werden es immer bleiben.

English

Cutlery tray for the small 40x37 cm IKEA MAXIMERA drawers. Unfortunately, IKEA does not offer any cutlery trays that fit these drawers. So I designed one that meets my requirements. In particular, it had to fit the Horl sharpener. Maybe someone else will find this cutlery tray useful.

I was able to print on an Ultimaker S5, so I only had to slice the box once (folder: cut-large-printer). Two additional folders contain cuts for smaller printers. However, the stl file can be adapted to any printer using PrusaSlicer. It is not necessary to glue the individual parts together. The tray fits exactly into the drawer, which keeps the individual parts in place, especially when cutlery is stored inside.

My print settings: PLA, 0.2 mm layer, 2 mm wall thickness so that no infill is created.

If you find my designs useful, you might consider buying me a coffee. But of course, you don't have to - my designs are free and always will be.

Tagi