Coupling for Cart Pushing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Our grandchild needs some assistance during driving with his new cart. Therefore, I designed a coupling to support him.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Our grandchild needs some assistance during driving with his new cart. Therefore, I designed a coupling to support him. Main purpose is for pushing the kid up-hill.
Few Printables models served as ideamakers. Then I created this flexible joint. The joint is in a tube, fastend by a M5x45mm with selflocking nut. Three ø5mm dowel pins hold the joints in the cross-part. Hope this will last some time? The rod for a broom with conical thread is screwed in the joint end. Ease fastening, easy unfastening.
You need one dowel pin @5mm x 40mm and two dowel pins @5 x 15 or 16mm.
Designed with TinkerCad. Printed with Tinmorry PETG-CF on my MK4 with Support-material from Bambu. Print is not the nicest, but for strength purpose it needed to be like this. Some milling off of the joint sides were necessary, I did change the new design parts, hope it fits well? So don't wonder, when you need to mill also. Print lasted 6h with 0.6mm nozzle.
Explore my other Printables: https://www.printables.com/de/@Tritschi