Glue stick holder for 30mm diameter / 40 gram size with countersunk screw hole. For countersunk wood or M3 Machine screws.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds a 30mm diameter glue stick to any point using a counter sunk screw. You can use wood screws or M3 T-Nut to printer
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Holds a 30mm diameter / 40 gram glue stick to any point using a counter sunk screw. Use either a countersunk M3 machine screw with a T Nut to mount it to a printer rail, or use a counter sunk wood screw to a wall. I was able to mount this glue stick holder on my Ender 3 S1 and Ender 3 V2 at the top of the gantry. You can mount it anywhere on a printer with an M3 machine screw + T Nut. I also used this wall mounted.
Never lose your glue stick for school projects!
There is an IKEA Skadis pegboard version of this as well - please check remix section!
- Print material: PETG
- Print settings: 3 perimeter walls, 4 bottom layers, 5 top layers, 20% Archimedean Chords infill.
- You want this part to be somewhat flexible, so think light and thin about the print settings.
- The “Glue Stick” font is implemented as a Text negative modifier. The font is optional. I was not able to implement the word “Glue Stick” effectively as part of the STL file in Fusion 360. Therefor, I am requesting someone to make a Remix! I uploaded an Orca Slicer .3mf project file with the text for the time being.
There is a version for the IKEA Skadis peg board: https://www.printables.com/model/1381452-ikea-skadis-glue-stick-holder-30mm40gram