Spare wheel for the pool cover roller - kolečko pro naviják bazénové plachty
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spare wheel for the pool cover roller with the wheel axis of R=13mm. Pro naviják s bronzovou osou průměru 13mm.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
It is necessary to print two parts - a separate wheel center and a separate tire. Each part must be printed from a different material. The center is best made of ASA or PETG, while the tire must be made of a flexible material, such as TPU96, for example. I can prepare a merged model upon a request.
Nutné tisknout ze dvou dílů - zvlášť střed kola a zvlášť pneumatiku. Každý díl musí být vytištěn z jiného materiálu. Střed nejlépe z ASA popřípadě PETG, zatím co pneumatika musí být z flexi materálu, jako TPU96 např. Na žádost mohu sloučit do jednoho modelu.
Priting instructions:
- CORE: ASA/PETG, layer-height 0,22mm, min. 4 perimetrs, infill 20%, Support:Tree, No brim
- TIRE: TPU95/96, layer-height 0,22mm, min. 4 perimeters, infill 15%, Support:NO but Make Overhangs Printable + Aditional Perimetrs for Overhangs
Gray Core and Black Tire offers the best look. I had only white TPU at the moment.