7x2 port horizontal patch panel for Leviton SMC 47605-42W
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 7x2-port horizontal keystone patch panel with push pin compatible holes.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 310
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 7x2 port horizontal patch panel for Leviton SMC 47605-42W. With two patch panels side by side, a full 28 keystone ports can be added along a single row in the media cabinet. There's space on both sides of the SMC after mounting the panels to support ethernet cables coming down into other patch panels.
The holes are made to be used with Leviton push pins. Tolerances are a little tight, so a small pair of pliers can be used to push the pin though if they get stuck. The stiffness rewards you with patch panels that feel tightly secured to the SMC, while pulling and pushing the pins remain easy to add and remove the panel.
There are some patch panels available which mount vertically. I rejected these as I wanted to minimize the vertical space consumed in the media cabinet. Though there are criticisms in this approach as ethernet ports exposed upwards can accumulate dust and debris, I feel this can be mitigated by simply plugging in empty ethernet keystone jacks to block falling material from getting inside.
I generated the model using OpenSCAD and @belfers keystone stl file. I'm new to OpenSCAD; in fact I'm new to CAD period, so please be patient as I clean up the OpenSCAD files before I update this post and include them here. Though the design wasn't made in a vacuum... I give much credit also to @rainb0w_wheez3, whose patch panel design I followed closely.
I used regular PLA with a 15% infill. Surprisingly sturdy! I've had no problems with it so far.