1 / 1
Motu M4 Under-Monitor Mount (35mm Pole) — zdjęcie 1

Motu M4 Under-Monitor Mount (35mm Pole)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A mount for the Motu M4 on a standard 35mm monitor stand pole.

Ocena
0 / 5
Polubienia
6
Pobrania
33
Wydruki
0
Wyświetlenia
306
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

A mount for the Motu M4 audio interface on a standard 35mm monitor stand pole.

Printed mine in Overture Super PLA+ but standard PLA would probably also work fine. PETG or ABS would also work, but might be overkill.

Printed flat, top down with standard supports enabled makes for a clean print.

You can use M5 bolts and M5 nuts to secure it, but it has a pretty tight friction fit so it might not be necessary.

Tagi