K&M Tablet Stand Instrument Stand Adapter (for Trumpet & Flugel)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
K&M instrument stand mount for K&M 19793 (or similar) tablet stand
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 2
- Wyświetlenia
- 533
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simply screw your K&M Trumpet or Flugel stand to your tablet stand. This way you don't need any more stands on the ground.
I printed it in PETG and used two strips of electrical tape to increase grip on the tablet stand leg. The stands legs have a diameter of ~19 mm and an angle of ~12°. So similar tablet or music stands will also work. You can use multiple instrument stands on one tablet stand.
The two sides are assembled using 3 printed alignment pins and 8 M3x12mm countersunk screws with nuts.
# Update 2025-12-29:
increased screw hole diameter by 0.1 mm
increased alignment pin and nut hole size by 0.05 mm
added chamfers to alignment pin holes and coil screw holes