Ender 3 cnc belt tensioner (BROKEN RN!!!!! WILL FIX SOON)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A smallmod for the ender 3 cnc (made by Futtawuh/Ravenkeeper) that allows you to more percisely tighten the pulley belts
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
IMPORTANT: The machine this model is used for is made by the awesome sauce Futtawuh!
If you have somehow stumbled here not knowing what that machine is check it out on his github or on printables.
Instructions:
You are gonna need one m3x4x5 heat insert and one m3x10 (or any other m3 screw that you have on hand) per belt tensioner.
Place the insert inside of the round hole in the belt tensioner clip.
Remove the front and back belt clips from the axis.
Bend one side of the belt so that the teeth sit outwards and across of each other and there is ~15 mm of loose belt on the top.
Put the belt in the belt tensioner clip so there is a tear-drop shaped hole in the loop.
Place the pin inside of the loop and make sure that its tight, but not bending the clip. If that happens readjust the loop.
Screw the belt tensioner pulley in the holes where the front belt clip once was.
Place the belt in the recess in the front corner bracket and screw in the clip with the screw as little as possible so it holds it in place
Stretch the belt from the back and attach it with the belt clip as per usual, making sure that it is fairly tight.
Twist the screw in front to tension the belt.