Meta Quest 3 gun stock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gun stock for Meta Quest 3 with silicone casings on controllers.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 1865
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Detachable 2 part gun stock for Meta Quest 3. Designed to use with controllers in silicone casings. Designed it with longer front part, to be more realistic to IRL proportions of combat rifles.
I modified and enlarged cupholder design from @strictsquid on thingverse, many thanks to him, link to his original model is here: https://www.thingiverse.com/thing:6289919 , feel free to check his stuff :)
Each part, front and rear, is meant to be seated with 34x4mm neodymium magnets with holes for M3 drill screw or one magnet and one steel counterpart. Buy two magnets with bipolar magnetism for stronger bond between two halves of gun stock.
Both cups have holes for a strap band on the side of silicone casings, to be pulled through.
I printed mine with PETG, but it can be done with PLA. 5 perimeters, 25% infill.
STL's are for whole 2 parts, to be printed at once or neatly chopped and prepared into small 4 parts, if you have 225x225mm print space like me, enjoy :)