1 / 3
Windowsill Shelf / Glasses Rack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shelf that hangs slightly below the windowsill moulding -- useful for storing glasses or other small items
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Share Alike
A custom-fit windowsill shelf / glasses holder with 159mm x 51mm shelf area (excluding curves).
Notes
- Print
tester.stlif you want to see if the outline lines up with your windowsill moulding .f3dand.stepfiles included in case you wish to make adjustments- The windowsill outline
- The print orientation should having the object's length facing upwards to prevent the need for supports
- This may require slower printing as this is a fairly tall print and may cause some layer issues near the end
- Should be printable in PLA as well, opted for PETG because I had it on hand
Print Settings
Filament: Polymaker PolyLite PETG - White
Nozzle: 0.4mm
Layer Height: 0.20 mm
Wall Loops: 3
Infill: 15% Gyroid
Support: No
Brim: No