1 / 2
Ender 3 Pro - Cooling Fan Stock Hardware (a little bit lower) — zdjęcie 1
1 / 2

Ender 3 Pro - Cooling Fan Stock Hardware (a little bit lower)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I needed to modify the model to go a little lower below the heating block. Ultimately, it was 5mm lower.

Ocena
0 / 5
Polubienia
6
Pobrania
36
Wydruki
0
Wyświetlenia
221
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I used PET-G with:

0.4mm nozzle, 0.1mm layer, with supports without raft.

Tagi