1 / 6
Vintage Ren bike frame lock spare key (for Peugeot/Hercules/etc.) — zdjęcie 1
1 / 6

Vintage Ren bike frame lock spare key (for Peugeot/Hercules/etc.)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spare key for vintage lock mounted on the rear wheel in vintage dutch, french or german bikes

Ocena
0 / 5
Polubienia
3
Pobrania
5
Wydruki
0
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This project allows you to print a spare key for a vintage Ren lock. Those locks can be often found in vintage bikes (dutch, german or french made), ex. manufactured by Peugeot, Gazelle or Hercules.

To create your spare key you need to have the original key!

How to prepare your key

  1. Lay your key flat on a white sheet of paper
  2. Make a photo of the key
  3. Open up the project file in Fusion 360
  4. Insert the photo into the project
  5. Calibrate the photo, knowing that the key should be 10mm wide in the handle part and 8mm in the key part
  6. Move/rotate the photo to match the key features in the first sketch (the two holes)
  7. Adjust the features in the first sketch to match as closely as possible with your key
  8. Ready to print!

 

Or… import the blank STL/STEP file and just modify the end of the key to match the original

How to print

No supports should be needed. PLA works great. Layer height of 0.2mm should work just fine

Tagi