Liczymy pasujące modele…
To keep my keys and padlocks apart, I created these sleeves for the key and corresponding padlock. This one fits the Three Circles 264 padlock. Best results are obtained when printing the key sleeve upright and using supports for the…
Padlock protection from the environment, a very simple and reliable way to protect against sun, rain, snow and prevent rust, fading and freezing of the lock. Such a protected lock will last a long time and reliably because the grease will…
Simple drawer lock. You need two screw and a padlock. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.28 Infill: 40% Filament: Filanora PLA/PETG Gray Category: Containers
Design & Mechanics Minimalist Engineering: The entire lock consists of only four internal/structural parts plus two keys (the right key and the wrong key). Snap-Together Assembly: No screws, glue, or external hardware required. The parts…
My son got a diary with a lockable padlock. Unfortunately, he locked both keys to the shackle, so I created a copy of the key and printed it in PLA. The printed key managed to unlock the lock (after trimming the end to a finer point).…
Simple permanent padlock with a height of only 30mm. Once locked, it can only be reopened by destroying the lock. Preferred material for printing is PETG, but PLA works too. Simple assembly. Superglue can be used to make a padlock much…
Triangle key for padlock. Designed in FreeCAD (source file included) Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: Min 20% Filament: Devil Design PETG Category: Hand Tools
A way of securing a cabinet or other furniture with doors. Be aware that this is a low security way of doing so. The screws are easily removed and the holes for the padlock can be broken with sufficient force. Needs to be printed twice,…
The size fits half the card as you can see in the photos, I'm going to make it smaller to only blocks the art and not the text itself. I didn't design the padlock itself ,or it was ai I don't remember..
A protective sleeve for a 23mm brass padlock to reduce banging noises and scratching on surfaces. It fits a padlock with dimensions A-30mm, B-51mm, C-23mm, D-5mm. On the pictures you have v1, but print files are for v2 which allows easier…
I designed this model for my kids, who wanted a safe place for their personal treasures. This chest has a simple design that's easy to print. You can easily resize it with the provided source files to fit your needs.
To keep my keys and padlocks apart, I created these sleeves for the key and corresponding padlock. This one fits the Three Circles 263 padlock. Best results are obtained when printing the key sleeve upright and using supports for the…
To keep my keys and padlocks apart, I created these sleeves for the key and corresponding padlock. This one fits the Three Circles 264 padlock. Best results are obtained when printing the key sleeve upright and using supports for the…
EN: This is a latch remix to lock the mechanically locking container (size 100mm x 100mm) from JamesThePrinter with a padlock. The latch is simply installed instead of a standard "Outer Linkage 100"-latch and inserted into one of the four…
Fully functional Padlock with key. I removed the nib from a ballpoint pen. It should be about 25mm long.
I prefer to print such functional items with petg. It is recommended not to scaled down this. You can scaled up but not too much so the spring can work. assembly instructions: place all the internal mechanism and the hook in the main…
Sliding door padlock cover. Perfect for sliding doors to garages, gazebos or garden sheds. Protects the padlock from rain and snow. Sticks on with double-sided tape. The model is best printed rotated in the slicer by 90 degrees. Osłona…
EN: This is a folding toy pillory handcuff that can be locked with a padlock, a carabiner or simply a screw and nut. At the request of the youngsters, the wrist holes only have a diameter of 48 mm. For ‘adult use’, you can simply scale…
This is a fully functioning combination lock designed to resemble the look of a heart. You can decide which wheels to print to determine the unlocking combination. The complete lock, with all color changes and components, takes only 2.5…
Padlock protection from the environment, a very simple and reliable way to protect against sun, rain, snow and prevent rust, fading and freezing of the lock. Such a protected lock will last a long time and reliably because the grease will…
Petit boitier permettant de verrouiller un connecteur USB Utilisation avec un cadenas dont l'anse à un diamètre de 3mm Connecteurs compatible : USB-A USB-C Micro USB Mini USB
Es un soporte ideal para este tipo de candado, es muy comodo y practico. It is an ideal support for this type of lock, it is very comfortable and practical.
EN: This is a toy pillory handcuff whose locking piece can be moved and then secured with a rope, a padlock, a carabiner or simply a bolt and nut. At the request of the youngsters, the wrist holes are designed to be rather narrow at…
Hier habe ich einen kleinen Block modelliert, auf den man drei Vorhängeschlösser stecken kann. Die Schlösser purzelten immer lose in meiner Schublade herum… Die drei Schlüssel kann man an der Stirnseite hineinstecken. Insgesamt etwas…
Two bypass knife templates to trace around on metal blanks. These open cheaper unshielded padlocks. Don't use these anywhere other than at home on your own locks. Legal here for me. Check your local laws before trying this yourself.…
Various inserts and keys for the original padlock model. They mostly don't cross fit, so great if you actually need multiple different keys: Lightning Diamond Heart Moon Triangle/trident No specific print instructions. Some of the keys…
My digital indicator: https://a.co/d/2FFRM4I My spring: https://a.co/d/c3aXYTS My springs for new version: https://a.co/d/e7rfH6a Each digital indicator is differently sized a bit so yours may or may not fit unless you have the same one I…
This is a watermelon that is empty inside with a padlock so you can lock your items inside to disguise it as a toy! Kids will really enjoy it! Perfect for the beach, park, or anywhere precious items may be stolen! This was created by me…
Demonstration of how to present the action of a simple mechanism. Designed to be printable, but not yet print tested.
Hi Makers! This custom-designed 3D lock is made for dual-swing garden gates and features a clever rotating mechanism secured by two padlocks. Remove one padlock, rotate the center piece from horizontal to vertical, and voilà — one side…
NO SUPPORTS NEEDED! The latch is mountet with 6 screws (M5) In the model is space for 6 Nuts (M5)- just pause the print at 8mm height and insert the nuts. Then resume the print, so the nuts are inbedded in the print. You need to drill the…
This is a quick model I made to celebrate TS12 "The Life of a Showgirl" coming out.
C Series Padlock Cylinder Clip, meant to emulate the functionality of Mul-T-Lock part LST-CCATCH-PL because the 2 park lock cores are a pain to gut. The STL I uploaded is 5mm narrower than the one in the pictures because that much width…
I broke mine because i tried to test it with too much force. Don't forget to file this down model down, the part where i split this might be messy.
Voll funktionsfähiges Vorhängeschloss. Entstanden aus der Idee ein Vorhängeschloss aus Holz mit meinem Laser zu schneiden, ist nun dieses Schloss entstanden. Viel Spass beim Ausprobieren! Ich freue mich über ein Feedback.
Mounting tool for topp hingt mount for PocketDoor/sliding door
Simple drawer lock. You need two screw and a padlock. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.28 Infill: 40% Filament: Filanora PLA/PETG Gray Category: Containers
Design & Mechanics Minimalist Engineering: The entire lock consists of only four internal/structural parts plus two keys (the right key and the wrong key). Snap-Together Assembly: No screws, glue, or external hardware required. The parts…
My son got a diary with a lockable padlock. Unfortunately, he locked both keys to the shackle, so I created a copy of the key and printed it in PLA. The printed key managed to unlock the lock (after trimming the end to a finer point).…
These locks from Harbor Freight come in a 2 pack and are keyed alike. I needed 4 locks for some storage lockers, so I needed a way to identify which keys went to which locks. I combined this with a simple matching-colored keyfob for easy…
All parts separated so you can utilize Cura's 'Print one at a time' feature, and for general convenience Category: Household
Simple permanent padlock with a height of only 30mm. Once locked, it can only be reopened by destroying the lock. Preferred material for printing is PETG, but PLA works too. Simple assembly. Superglue can be used to make a padlock much…
Functional Padlock with Key Print-In-Place. I've printed the padlock and key with 0.16 mm layer height, 2 perimeters and 15% lightning infill. For a stronger lock use more perimeters or more infill. After printing built-in support in the…
Padlock Display Stand - Large Curved Body Locks
Padlock Display Stand - Medium Curved Body Locks
Padlock Display Stand - Large Flat Body Locks
Padlock Display Stand - Medium Flat Body Locks
I designed this to be printed in TPU and to fit a 30mm ABUS Titalium padlock (TKTI23/30), with a loop that you can secure so you can't lose your padlock by leaving it on the car roof and drive off.... like i did...
Simple padlock with compliant mechanism for latch operation. It fits common household door key. Use PLA. Print 0.2 mm layer. Supports needed only for key. place the key flat.
A bondage collar that uses a sliding front plate to lock the collar closed. The front plate holds a small padlock, so the collar requires a key to remove. For the padlock, you can use the Master 120 (…
I designed this nice remix for a project to lock a crate with a padlock or D/CLP-shackle. I added my source files (.ipt) so you can make adjustments if needed. The geared hinge is a print in place part only support needed for the cut-out.…
Padlock Edge Protection to avoid scratches Category: Sport & Outdoors
Keeps children & pets out of containers, with the help of a caribener. Designed for easy printing. Uses a piece of 1.75mm filament as the hinge pin. Category: Containers
This Model only uses about 0.5 m of filament so with 5 m you can print almost ten locks! I recommend to check out the other designs in Prusas contest. Maybe you find some other useful designs to print with your remainding filament. The…
The Abloy 362, especially with a Protec2 core, is one of the most unpickable padlocks made, with no one having been able to pick one on video, even with special $300 tools. With its 15mm shackle, it cannot be cut with bolt cutters. If you…
Proyecto original de una bisagra para bloquear el frigorífico. Con perforaciones para insertar imanes de neodimio. Todas las piezas imprimibles en PLA. Con un 5% de relleno es suficiente (no necesitamos resistencia ni peso) El candado se…
A fully functional padlock You only need a spring from a pen as hardware! All of the parts should be printed in the orientation the .stl files already are in. Alternatively, just grab the ready .gcode files and you are ready to print. You…
I've had this padlock since I was in high school touring China in the early 90's. It was a tumultuous time right after Tiananmen '89 and the authorities made it mandatory to lock all travel bags before checking into the airport (it may…
The sliding door that allows access to my bedroom is hollow so the latch that someone has fastened to it with 4 screws, easily comes off as the 4 screws aren't anchored into anything more than 1/8" worth of hardboard and the rest is air.…
This is my 3d printable variation on the famous 6 lever Champion pancake lock. It uses real springs from a generic springs set off Aliexpress. The springs used are: 1 Compression 23/64" X1-3/8" for the shackle 2 Compression 1/4" X13/32"…
This is the second version of my padlock and this time much easier to print and assemble. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Notes: The lock body was designed to be printed with…
Assembly instructions are available in this video - https://youtu.be/MoWiffSBdp0 Printing: 0.02 layer with no supports for all parts is good enough. NOTE: I fixed the issue in the shackle, please download again. Category: Parts
Wanted a better zip for a bag, so it could be locked shut. This enables that. I love the original design ! Tried to keep it close to the original in terms of style, I think I did that pretty successfully. The chamfer around the edge, and…
This is the first design that is fully mine and made with something other than tinker cad. I found the included reference photo and thought it would be a good choice to start modeling. The lock can be made with the included pins or 5…
(Hardware required - see paragraph 3) This lock takes about 2 hours and 15 minutes to print (0.32mm layer height, 3 external walls, 20% infill) and shouldn't require any sanding (depends on your printer) You will need to place the gears…
This model is a 3D printed padlock inspired from a zip tie. It can be used to lock a bag and protect you from pickpocket in a crowd. It is not very strong but it would take enough time and efforts to break for you to realize something is…
Simple drawer lock. You need two screw and a padlock. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.28 Infill: 40% Filament: Filanora PLA/PETG Gray Category: Containers
Recently, I got a bike and wanted somewhere to store my padlock and chain while riding. With the padlock having an extended shackle I had the opportunity to make a two-part slide-in mount for it. For a padlock with a normal shackle I…
Valentine lockable box for padlock, ideal with combination of Mechanical Heart Lock by P-atix. Without text. You can add your own text for example in PrusaSlicer. Ideal for small Valentine gifts, like jewelry etc :) <3 Use supports for…
Just print it out of any material you like. PETG worked best for me but even PLA worked just fine. Just feed it trough some dors, locks or what ever and snap it shut. Afterwards you have to break it to remove it. CHANGE LOG 15.02.2023:…
The original cover for the M115X-series (see here ) Master Lock® brand padlock can get damaged over time or can become sticky as some rubbers of the era tend to do. This replacement cover can be used to replace the original and provide…
This is a remix from the original PadLock Puzzle Box by rushing. Kudos to rushing for a fun way to gift otherwise boring card/cash. The uploaded file has blank top. You can personalize the box by embedding text or graphics into the lid. I…
I used the iron filled PLA for this print as I wanted the lock to be rusty.. it's a fake lock for a train car to be smashed by an actor on the TV show i work on. I used vinegar/salt/hydrogen peroxide as the solution to make it rust. it's…
[ENG] TIFON TF40 padlock cover, to extrude text and write the name or whatever is necessary. [CAT] Funda pel cadenat TIFON TF40 per extruir text i escriure el nom o el que sigui necessari.
STOP! Check out the improved Combination Padlock v2 design! https://www.printables.com/model/682893-combination-padlock-v2 This is a working combination padlock design that can be used in place of a standard Master Lock on a locker or…
Update (7/14/2023) - no glue version! I've re-worked a few things so that everything presses or snaps together, making it a great project to put together with kids. This (mostly-flat) kit card is a bit of a challenge to make but will…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Padlock, 100% printable with skeleton key, no hardware…
The original design is great, I love it. But the original design of 3 digits, I think the strength is not enough, I remixed a 5 digit lock.From 216 possible combinations to 7776 possible combinations. 70% and 80% still have good…
Since i had a little mess by storing all the padlocks and keys in a little box, i designed this tray to hold them all in place. So i can see, if all Padlocks and keys where thye belong to. Printed it in PLA with .28mm layerheight.
Triangular padlock key. First model has letter P because I use it in the parking lot I added second model with clean side walls. Print instructions In the bottom part use as many perimeters as possible and select random seam
A hinged padlock hasp for locking a box or fridge door. Large and small size with and without screw holes. I printed the loop part laying flat for added strength and to avoid supports. Then I welded it in place with glue or 3d pen. Print…
Padlock mount for an electric scooter use existing hardware to mount on scooter then simply insert the shaft into the hole and lock Ive included a print profile for bambu x1c in abs with 0.16mm layer height, 2 walls, 45% infill, 5mm brim…
Please share your makes! The perfect tool for DIY security tools - the Beverage Breacher. This 3D printed template is your go-to solution for creating padlock shims from ordinary aluminum cans. Embrace the blend of traditional…
Triangle key for padlock. Designed in FreeCAD (source file included) Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: Min 20% Filament: Devil Design PETG Category: Hand Tools
This is a one-piece replacement for the spring pin and latch pin for the printable padlock http://www.thingiverse.com/thing:4592 Instructions Print it and use it instead of the spring pin and latch pin. Category: Tools
Some of you asked for a way to make the safe lockable. I assume the desire is to secure the contents from children who wouldn't use heavy tools to open the safe. :-) This small extension is simply adhered to the door frame. Afterward, you…
