Outdoor Snap-Fit Enclosure for ESP32-S2 Water Tank Level Monitor (JST-SR04T, WS2812 LED Support)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Durable PETG snap-fit enclosure for ESP32-S2 Water/JoJotank level monitoring projects. Designed for use with JST-SR04T.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a purpose-built outdoor enclosure designed for a JoJo tank level monitoring project utilising an ESP32-S2 microcontroller and JST-SR04T waterproof ultrasonic sensor.
The case features:
- Snap-fit lid for tool-free assembly while maintaining a firm hold.
- Centre hole for JST-SR04T sensor head, with internal standoffs for the sensor’s PCB.
- Custom cut-outs for ESP32-S2 development board and USB-C breakout board (tight fit to prevent movement).
- Optional LED display support — space for a 4×4 WS2812B LED matrix on the inside of the lid.
- Weather-resistant PETG design suitable for outdoor use (when printed in PETG).
- Easily modifiable STL files to accommodate other ESP32 or USB-C board dimensions.
Power & Wiring
The design uses a USB-C breakout board to feed power to the ESP32-S2.
The ultrasonic sensor connects via a JST connector, and the LED panel (if installed) connects directly to the ESP32 pins as per the provided ESPHome configuration.
Example ESPHome Code
Below is a sanitised version of the ESPHome YAML used in the project (WiFi credentials, API keys, and other sensitive values removed). PLEASE NOTE: You will have to provide your JoJo tank dimensions as the example code is for a 1000-litre slim tank, with a 204mm offset for sensor placement when the tank is full.
esphome:
name: jojo-echo
friendly_name: JoJo-Echoesp32:
board: esp32-s2-saola-1
framework:
type: esp-idf
logger:
api:
ota:
wifi:
ssid: "YOUR_WIFI_SSID"
password: "YOUR_WIFI_PASSWORD"
LED Grid (WS2812)
light:
- platform: esp32_rmt_led_strip
id: tank_led
name: "Tank LED Grid"
chipset: ws2812
pin: GPIO18
num_leds: 16
rgb_order: GRB
default_transition_length: 0s
restore_mode: ALWAYS_ON
Ultrasonic Sensor
sensor:
platform: ultrasonic
trigger_pin: GPIO7
echo_pin: GPIO8
id: tank_distance
name: "Tank Distance"
unit_of_measurement: "m"
update_interval: 5s
accuracy_decimals: 3
filters:
- median:
window_size: 5
send_every: 1
send_first_at: 1
- sliding_window_moving_average:
window_size: 3
send_every: 1
- filter_out: nan
platform: template
id: tank_litres
name: "Tank Volume"
unit_of_measurement: "L"
accuracy_decimals: 2
update_interval: 5s
lambda: |-
if (isnan(id(tank_distance).state)) return NAN;
const float r = 0.42f; // radius
const float pi = 3.1415926f;
const float full_distance = 0.204f; // m at full 1000L
const float volume_height = 1000.0f / (pi * r * r * 1000.0f);
const float h = full_distance + volume_height;
const float x = id(tank_distance).state;
float litres = pi * r * r * (h - x) * 1000.0f;
if (litres < 0.0f) litres = 0.0f;
if (litres > 1000.0f) litres = 1000.0f;
return litres;
This enclosure has been designed with practicality and durability in mind, ensuring your ESP32 tank level monitor remains protected outdoors, while still allowing for easy upgrades and maintenance.
Print Settings (PETG)
- Material: PETG (recommended for outdoor durability)
- Layer Height: 0.2 mm
- Wall Line Count: 4 (for increased strength and weather resistance)
- Top/Bottom Layers: 3
- Infill: 30% Gyroid (for strength without excessive material use)
- Print Temperature: 240°C nozzle / 70°C bed (adjust for your filament brand)
- Cooling: Minimal cooling (10–20%) to maintain layer adhesion in PETG
- Supports: None
- Orientation: Print lid and base separately, both facing up to minimise supports
- Post-Processing: None required.