RackStud - M6 - M8 - M10... Screws and Nuts, Hex and Knurled
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Completely configurable screws with different head sizes. Primarily use as M6 RackStruds for Modular 10inch Server Rack
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 883
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this screw and nut set with the “Modular 10inch Server Rack” in mind.
I wanted the hex nut to be flush with the rails.
Also never liked these long hex rackstuds. I wanted knurled ones, not too short and not too long.
Used screws in my server rack:
- 18mm hex screw (5mm head height)
- 28mm knurled screw (7mm head height)
- 10mm knurled knobs
I just uploaded a small set of sizes.
If you need other sizes, then just grab the Fusion360 file and change the parameter to fit your needs!
There you can configure:
- screw size
- screw length
- shaft length
- head type
- head height
- …
I printed these screws with PETG standing up and they are really strong!
Have fun!