1 / 1
Staff of Domination (MTG)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Staff of Domination, based on original art created by Ben Thompson and Warren Mahy for Magic the Gathering.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (23)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (8)Powiązane
When printed at full scale the staff measures 928mm tall. Its main body is made from ¾ inch schedule 40 water pipe.
Additional Purchased Parts
- 8x M6x1 Pan Head Bolt 12mm long (12mm diameter, 3mm thick head)
- 8x M6x1 Hex Nut
- ¾ inch schedule 40 water pipe
- 145mm long
- 450mm long
- 117mm long
- 5x 1-ounce glass jar (listed in instructions as Small Vial)
- 1x 3-ounce glass jar (listed in instructions as Large Vial)
- 2x 6mm Spring 20mm long - Optional
Notes:
- Please refer to SoD Assembly Instructions.pdf in the download for detailed instructions with diagrams.
- Some of these parts have tight tolerancing with nominal gaps between pieces of 0.10mm. Due to this it is necessary for your printer to be properly calibrated for dimensional accuracy.
- Some regions not have access to the same purchased parts I used. Due to this, relevant models for those parts are uploaded as reference. They are not intended to be printed.
Post Printing
- The large and small vials are filled with colored resin. Please note that not all colors of die have equivalent amounts of pigment.
- Painting was done with auto filler primer, Krylon metallic dark metal, and Rust-oleum brilliant metal bronze. Weathering and detail painting was done by hand with acrylics.