1 / 1
Staff of Domination (MTG)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Staff of Domination, based on original art created by Ben Thompson and Warren Mahy for Magic the Gathering.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 15
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
When printed at full scale the staff measures 928mm tall. Its main body is made from ¾ inch schedule 40 water pipe.
Additional Purchased Parts
- 8x M6x1 Pan Head Bolt 12mm long (12mm diameter, 3mm thick head)
- 8x M6x1 Hex Nut
- ¾ inch schedule 40 water pipe
- 145mm long
- 450mm long
- 117mm long
- 5x 1-ounce glass jar (listed in instructions as Small Vial)
- 1x 3-ounce glass jar (listed in instructions as Large Vial)
- 2x 6mm Spring 20mm long - Optional
Notes:
- Please refer to SoD Assembly Instructions.pdf in the download for detailed instructions with diagrams.
- Some of these parts have tight tolerancing with nominal gaps between pieces of 0.10mm. Due to this it is necessary for your printer to be properly calibrated for dimensional accuracy.
- Some regions not have access to the same purchased parts I used. Due to this, relevant models for those parts are uploaded as reference. They are not intended to be printed.
Post Printing
- The large and small vials are filled with colored resin. Please note that not all colors of die have equivalent amounts of pigment.
- Painting was done with auto filler primer, Krylon metallic dark metal, and Rust-oleum brilliant metal bronze. Weathering and detail painting was done by hand with acrylics.