Counting matching models…
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
Oy! I was looking for a Sorting tray to sort out all my Mtg cards without taking too much space, I found one for catan cards and went to work. •I design the model to accommodate cards without sleeves, its a perfect fit for those! But I…
This compact box can snuggly hold a sleeved deck of 100 TCG standard sized cards (2.5 in x 3.5 in / 6.4 cm x 8.9 cm), with an additional space for tokens, dice, etc. There is an optional basic box version with no divider that can be…
These are small plates with indentations for your magic spindown dice. I made two plates, one for the regular spindowns and one for the newer big spindowns. Fast and easy to print and a nice gift for your friends. I added two dice per…
I reduced the lid to 99.5% in width so that it fits. Depending on print quality, you can adjust the lid's width to ensure a proper fit.
8x3mm magnets are needed, 4x for the lid and 4x for the body. Use Superglue. For the mana colors I used water based UniPosca markers, white color is missing. That's it, feel free to remix it. :)
Added a 2.0 model for the single sleeve option, not huge changes, just less jank than the first one Also added a double sleeved option A commander sized rugged deck box. Can be used for any game with standard sized cards but made with mtg…
This 3D-printed deck box. It's built to hold over 100 double-sleeved Magic: The Gathering cards, with extra space for tokens. The design includes a smooth-sliding drawer that keeps cards secure, and four powerful N52 magnets ensure it…
MTG Life Counter Card v2 New version is smaller, same height and width as a credit card. 85.60 x 53.98 x 1.8 mm I am fairly certain this is the thinnest fully 3d printable life counter so far. Print with lowest layer height possible, 0.08…
Introducing our 3D printed Phyrexia-themed MTG Commander Deck Box, designed for TCG fans who value both a sinister style and functionality! This deck box is capable of holding up to 100 sleeved cards, 10 unsleeved cards (tokens), and 1 HP…
Introducing our Gondor-themed Commander Deck Box, designed for TCG fans who value both a noble style and functionality! This deck box is capable of holding up to 100 sleeved cards, 10 unsleeved cards (tokens), and 1 HP counter, ensuring…
This deck box can comfortable fit 100 single sleeved cards and a preview window for your commander. The tray fits neatly into the box and features tabs to easily remove and insert your deck. The box has an extra section for you to put…
This is my take on @Collingall 's version of the "Rugged Box (Parametric). Thanks for sharing the files - give them a like too: A slim and elegant deck box for Magic: The Gathering cards (or any other TCG with the same format). Fits…
I noticed a lack of deckboxes that were both gridfinity-compatible and that satisfied my needs for a box, so I sat downand made my own! It fits ~110 singled sleeved cards and ~13 sleeved tokens in the dedicated slot. You could technically…
Hi! This box is made to be tight fit, the lid its supposed to be difficult to be put on right away so u need to sand it down until it can naturally go in and stay that way when shaking it upside down. I also included autodesk files so u…
Mine is printed in bronze PLA, 0.2 layer height, 2 perimeters, gyroid infill of 15 percent, and ironing on all top layers. I might remix this one again and make the other mana colors for the back, and character/token types for the front.
A holder for your cardboard punch out counters from MTG pre-release
Remix of my favourite box model with sliding lid that snaps very well. Large central slot is for 10 pcs of -6/+6 dice, 8 slots on the sides can be used to accomodate various polyhedron playing dice. Multimaterial MTG logo on the lid.
Printed with PLA 4 top 4 bottom 3 wall 20% infill. I dont know if this will work for double sleeved but works great for single sleeved and tokens I use the lid as a grave yard and the body to hold the deck as I play. The lid is tight at…
Deck holder, holds up to about 100 double sleeved standard sized cards
Simple and functional deck box with commander window. Specifically designed for EDH/Commander decks but can be used for any TCG. I never liked how much I had to squish my double sleeved commander decks; so, this is designed to hold 100+…
A simple Command Station for your EDH game. Count your life with three 22 mm D20 dice. The 22 mm MTG spin down dice work perfectly. You can also purchase them off of amazon. Three separate 22 mm D20 dice to keep track of Commander Damage.…
After using the model for a couple of games, I didn't like how the corners of the cards would get caught on the holder. I also decided to add a space to hold tokens, etc. I have uploaded the improved version here: MTG Commander Deck Shoe.…
MTG Commander Deck Shoe. This is a new and improved version of the one I made earlier. Placing cards into this version is much easier, and there is no place for the corners to get stuck. I also added a slot to hold tokens, or other…
Simple tokens to add asimmetrical bonus/malus for magic the gathering [ +1/0, 0/+1, -1/0, 0/-1 ] Uses same shape so the box can be the same as the original model I have reduced the width (total 2mm) so that in a single box you can store…
Supports at 8 degree threshold recommended, just where the top of the commander window is. I've had best luck with <0.4 perimeter width and only 3 perimeters, as this allows some of the thinner walls to be filled with infill. You will…
Simple organizer to hold MTG cards inside the Fondamentals kit box, inspired by the cardboard organizer already inside the box. The cardboard box can contain four organizers, the fourth organizer is a tight fit so that the organizers are…
I set out to make a deck box for my commander decks. I have seen plenty of great designs out there. I started with other models, but nothing worked out the way I wanted them to. I came up with this idea where the deck is laid on its side.…
MTG Commander Deck Box – 100 Double-Sleeved + Commander Display A clean and functional MTG deck box designed specifically for Commander (EDH) players. This modified design securely holds: ✅ 100 double-sleeved cards ✅ Commander card in a…
I went to the trouble of modifying the slotted plates (designated as v3 in the original) to work with the v1 Card Shuffler Shaft that uses O-rings as grippers. The positioning is slightly off for all 3, and the slots were widened ~1 mm…
Thanks to ctag and Nibb31 for their customizable box designs! I simply created a set of inserts that should allow you to easily carry: Two tcg decks (with or without sleeves). Easily holds a 60card mtg deck or a NetRunner deck plus some…
MTG Limited Tournament Prize
TCG / MTG Deck Box with optimized capacity for 80 single-sleeved cards Compatible decks: Pokémon One Piece Magic: The Gathering Digimon Disney Lorcana Star Wars: Unlimited Yu-Gi-Oh! Any deck with sleeves up to 67 x 92 mm Technical Details…
Bei mir hat das mit PLA 0,2 mm und Schriftzug nach oben mit Bügelfunkton am besten geklappt. Die beiden Schalen habe ich in der Mitte noch mit einem kleinen Tropfen Superkleber verbunden dann hält das alles auch ordentlich.
I took BilboX_289296's creation and 123d file and converted it to work with Fusion 360. I then modified the models to work with the magnets I had on hand which were 2.75mm by 10mm. Printed on a MK3S 0.2. Use supports for the Base module.
Parametric MTG draft pack holder with optional staggered heights
This is a file for 10 of the +X/+X (up to +6/+6) counter markers and a box to hold them. Overall the box ends up being 56.6x37.8x27.5mm.
This is a 27mm Coward token for marking creatures as cowards in Magic The Gathering. I tried to make these smaller but any smaller and it was not printing all parts of the letters so 27mm is where i found it best. This file is for 9…
Rinjamin's model is great, I just had a hard time fitting all of my tokens inside. There's a couple of versions, starting at 5mm wider (which is plenty wide for my deck + tokens), up to 25mm wider, in increments of 5 mm.
Remix of this makerworld model: https://makerworld.com/en/models/2425647-tmnt-full-colors-life-counter#profileId-2660403
Look, I know you have too many cards, we all do. If you're like me and don't have enough drawers to store them all, then I have a solution to clear up space so that you can buy some more! This storage system is a little different than…
This is really just a new set of lids for the Magic Deckbox I made previously for my kids. I may upload more as my kids request them. Current set includes Chewtle, Pikachu, Vikavolt, and a Pokeball. EDIT: 7/2/2021 Added Dragapult and Mega…
I have two younger boys who want to be like their big brother, so they have a handful of magic cards and some tokens. The deckboxes I've made in the past are too difficult for them to open or store their cards in. This is a simple sliding…
I wanted a token to drop when I use my Broodmaster Hydra. I found a clipart hydra on google and ran it through Inkscape and SolidWorks. It is scaled to be the same size as a standard Magic card. Category: Toys & Games
I made these to have an easy way top track how many times you have cast your commander during a game of MTG commander. I made it for a 12mm D6 so hopefully you dont have to track it past that point. Hope you enjoy and can get some use out…
This is a counter holder for the MTG tokens made by @Sidarthus89_2636056 . It is designed to fit into the accessories tray of the commander deckbox made by deltamade on makerworld. It holds a total of 20 tokens, 10 per stack. Tokens:…
Six MTG mana / life counters in one bundle — one per colour (**White / Blue / Black / Red / Green / Colourless**). Each counter is a small disc with two thumb-twistable dials behind a window: the left dial reads tens , the right dial…
A physical play prop for the Undercity dungeon from MTG's Commander Legends: Battle for Baldur's Gate (token 020/020). When your deck wants to venture into the dungeon , this is the board your pin walks across. Nine hexagonal rooms in a…
D20 with Rise of eldrazi, Hour of devastation, Amonkhet and Phyrexian logos.
A two-piece tracker for The Ring tempts you , the keyword from Magic: the Gathering — Tales of Middle-earth (LotR). When a card says "The Ring tempts you", your Ring grows in power through 4 escalating levels (cumulative): I — Legendary :…
Needed a way to start better organizing my MTG collection and separating decks within boxes. These dividers make it super simple to just segment things, and visually (clearly) see what chunk of cards is “below” the divider (once you apply…
This is my take on how to handle a lot of tokens. There are two sets of numbers that can range from 0-99. One on top and one on bottom. The bottom number can represent the total amount of tokens you have. While the top number can…
This is a MTG inspired Black Lotus. There are 2 different models. One lotus flower with a bud and one lotus flower without a bud. There are also 2 different stems. One is shorter (this is pictured in the photos) that is around 4 inches…
This is a remix of my Mass MTG Tokens design but instead of foil labels, these use a dry erase label. You will need some clear dry erase sticker sheets to create the label. I have included 4 different label templates you can use. Print…
This is a remix of Gimpel's awesome expanding deck box with an unlocking movement. A slight twist of the top makes the six locking mechanisms slide out and release it. While I was building two of these, I made at least small tweaks to…
Simple plus tokens for Magic The Gathering 17/12/24 UPDATE: New smaller versions now available for download :)
Minus tokens for MTG 17/12/24 UPDATE: Updated the design with smaller variety.
A Parametric, Vase-Mode Deck Box! This parametric deck box has been designed to hold a full 100 card MTG commander deck. Some key parameters for you to play with include: Card Width Card Length Deck Thickness Box Wall Thickness Card…
I made a lid for the MTG card storage box created by @MakerDBS
DONATE TO DAEDALIK DESIGNS: If you've enjoyed my design and you're feeling generous, please feel free to leave a donation at the link below. Your support is always appreciated! https://www.paypal.com/donate/?hosted_button_id=APUXC5PFJPAZQ
Step up your game with these visually enhanced deck cases, a creative remix of an existing design loved by TCG players. While the original functionality remains untouched, capable of holding over 100 sleeved cards with ease, it's the…
I've seen multiple versions of this plate but it never QUITE matches what I want out of the plates. They try to do too much or aren't done just well enough for my organizational requirements. I decided to make my own versions of these and…
Simple Deck Box that holds 100 Magic, Sorcery, Pokémon (Sleeved Cards).
For the hinge, I just used a paperclip that I cut and bent to the right size. Included is a version with the Tennessee tristar on the corner. Printed it with manual color change on the Mk4 to give the stars a different color. I've…
I liked the remixed version of @MrMesh. I just adjusted it to my personal needs regarding space. Lids are also available.
Lightweight commander box that can showcase the commander card, with a lid to close the box. Can holds 100 sleeved cards or 100 sleeved proxies.
This is a better solution to buying multiple smoke blessing tokens and instead placing one of these on each creature.
In place of dice or token cards to represent slime counters on a creature you can place these tokens to do so.
Print with top/bottom on build plate, so it will be supportless. Print at 100% scale
The size fits half the card as you can see in the photos, I'm going to make it smaller to only blocks the art and not the text itself. I didn't design the padlock itself ,or it was ai I don't remember..
Size of a standard MTG card (so it fits in your deck box). Use two twenty-sided dice (for you and opponent) and they won't accidentally roll. They fit in in slots very well.
I have redesigned this deckbox to eliminate the manifold errors my slicer was throwing when I needed to print a new deckbox. I also added in a new feature for the lid - a small lip to help keep the lid from sliding off when in motion. The…
I have redesigned this deckbox to eliminate the manifold errors my slicer was throwing when I needed to print a new deckbox. I also added in a new feature for the lid - a small lip to help keep the lid from sliding off when in motion. The…
This is a all-in-one setup for making loyalty counters for Planeswalkers. I have included counters from 1 to 15. Also included is a case to put them in - the case is formed to fit the tokens, to minimize movement in transit. The case is…
These are +1/+1 and -1/-1 tokens, along with a simple box formed to match the tokens, held together with a friction-fit. By changing the filament at the proper height, you can achieve a nice two-tone that really pops when playing. A…
To be updated as new sets release. I was dissatisfied with the look and size of some counters that were out there for Magic the Gathering, so I decided to learn how to do a little 3d modeling and make my own. These files include EVERY…
It contains three printable models to play MTG, which have been customized with a Lord of the Rings theme.
This model is designed for card decks from different TCGs, fitting 80 double-sleeved cards. Like the original model, it is compatible with 6x2 mm round magnets to improve closure. An element called 'hitch' has been added; 8 are required,…
Oy! I was looking for a Sorting tray to sort out all my Mtg cards without taking too much space, I found one for catan cards and went to work. •I design the model to accommodate cards without sleeves, its a perfect fit for those! But I…
MTG deckbox which fits 100+ double sleeved cards + some tokens
This (very) fast-printing trading card storage solution has been specifically designed to print in ‘vase mode’ to allow for very low print times and economical filament usage. Each box holds approximately 400 standard size trading cards…
This set of models features the Kingdom Heraldry of the Amtgard kingdom of Crystal Groves. It's a set of belt mounts (stitch-on and blank, without stitch holes) and strap ends for 19mm-wide (¾") belts and 50mm (Amtgard-style macrame)…
Designed in Fusion. Enter your desired dimensions, add logos to taste and hit print. Prints nicely in PLA basic without any supports.
MTG Deck Box with a sliding lid and a magnet to hold the lid in place. Inspiration for the Box came from the following tutorial: There are four files to download: 100 Cards variant: mtgEDHSlidingBoxBottom100.stl mtgEDHSlidingBoxLid100.stl…
Remixed rugged box for holding Magic the Gathering decks, or loose cards. Tight enough to hold the cards without smashing them or the sleeves, but loose enough to not need to jam the cards in. The hinges use M3x25mm bolts,…
This is a frame to put your commander in. It embeds a life counter and a cast counter. To put it in, just put your card in a standard size sleeve (I use Dragon Shield + perfect hard inner sleeve). Insert it in the hole at the bottom and…
This is a frame to put a token in. It embeds two counters to keep tracked of how many tapped/untapepd of them you have. To put it in, just put your card in a standard size sleeve (I use Dragon Shield + perfect hard inner sleeve). Insert…
A very simple, quick-to-print deck box. Fits single-sleeved cards nicely (+ a few bigger alternatives for thicker decks), with some wiggle room for a few tokens. This is meant as a “temporary” deck box that's fast to print, and perfect to…
This is a remix of Simon's deck box that increases the dimensions as well as adds a window to view the Commander. This will fit 100 double sleeved cards. Cards in the example photos are wrapped in Dragon Shield perfect fit inner sleeves…
Really liked the packs created by @stuckpixel, but wish they had some sort of "lock" on then to keep them closed. So made a remix to add that, aswell as change a bit the look of the finger notch. All other specs are identical to the…
An MTG deck box designed with a latching two-part outer shell that is mechanically linked with gears. This deck box features a removable tray that will hold 100 double sleeved cards with a little extra space for tokens. There is a space…
I removed the +1/+1 counter text so that I could put in a piece of dry erase and customize it on the fly
This is an STL file for a container for a single booster pack of JumpStart MTG. It will fit 20 cards single sleeved with ease (with room for a few token cards as well), with an exterior slot to display the face card. About External…
A remix of @Berbelucha 's awesome Jumpstart Box model. I added pockets for 20 mm x 5 mm x 2 mm magnets and finger notches in the front and back sides to make it easier to separate the top and bottom boxes when assembled.
I got these symbols from Magic the Gathering Mana Symbols and Guild Symbols Insignias by rianocerous on Thingiverse: https://www.thingiverse.com/thing:4307030 and This thing was created by Thingiverse user rianocerous, and is licensed…
Magic the Gathering commander's deck box (for +100 cards double sleeved). Decorated with double colored MTG logo.
To see the build video of how I made this design please see my YouTube video added below or visit my channel @froooch I added a dice caddy that can be stored in the box over your deck or be attached to the top of the box during play. The…
