ScrewBall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After trying numerous methods to get the parts to print correctly, I determined that the unusual printing position…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
After trying numerous methods to get the parts to print correctly, I determined that the unusual printing position produced the best overall smooth surfaces. Print 3 identical parts. Scaling not recommended without tolerance re-design. Use the slowest, thinnest layers you can tolerate. Support and orientation are critical. Stick with the orientation I have here unless you just can't get a good print without reorienting the parts.
I used .2mm layers of Prusament PLA on a Prusa i3 MK3s. Use .15mm layers if you can take the extra time to print. I will include the gcode I used for that printer. See the picture of the part orientation on the print bed and the support I used. The support is for 45 deg. overhangs, 2 raft layers. I used 3 bottom, top and side layers.
Cleanup: make sure the middle of the inside curve line, as well as all interior surfaces, are cleaned up to make sure the parts will slide together well.
Assemble. Easy so I will not say more.
There is also a base/stand file included here.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: any PLA 3 colors look best
Category: Math Art