ScrewBall
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After trying numerous methods to get the parts to print correctly, I determined that the unusual printing position…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
After trying numerous methods to get the parts to print correctly, I determined that the unusual printing position produced the best overall smooth surfaces. Print 3 identical parts. Scaling not recommended without tolerance re-design. Use the slowest, thinnest layers you can tolerate. Support and orientation are critical. Stick with the orientation I have here unless you just can't get a good print without reorienting the parts.
I used .2mm layers of Prusament PLA on a Prusa i3 MK3s. Use .15mm layers if you can take the extra time to print. I will include the gcode I used for that printer. See the picture of the part orientation on the print bed and the support I used. The support is for 45 deg. overhangs, 2 raft layers. I used 3 bottom, top and side layers.
Cleanup: make sure the middle of the inside curve line, as well as all interior surfaces, are cleaned up to make sure the parts will slide together well.
Assemble. Easy so I will not say more.
There is also a base/stand file included here.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: any PLA 3 colors look best
Category: Math Art