1 / 1
Soldering iron and wet sponge holder for Skadis — zdjęcie 1

Soldering iron and wet sponge holder for Skadis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetically attaches to Skadis uses parts from the soldering iron and wet sponge holder.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
41
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Uses the parts from the soldering iron holder that comes with some cheap soldering iron also requires 4, 6x3 mm magnets. I would recommend using something more heat resistance I used PETG and have noticed burns around the sponge but nothing that impacts performance. It is recommended to print the model with the larger magnet holes. Print the stand laying flat supports on build plate recommended but may not be needed. Print the stand holder with the top part down with the tail part touching the build plate.

Tagi