1 / 1
Soldering iron and wet sponge holder for Skadis
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetically attaches to Skadis uses parts from the soldering iron and wet sponge holder.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Uses the parts from the soldering iron holder that comes with some cheap soldering iron also requires 4, 6x3 mm magnets. I would recommend using something more heat resistance I used PETG and have noticed burns around the sponge but nothing that impacts performance. It is recommended to print the model with the larger magnet holes. Print the stand laying flat supports on build plate recommended but may not be needed. Print the stand holder with the top part down with the tail part touching the build plate.