1 / 2
Radxa Rock 5B+ Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic and open case for Radxa Rock 5B+
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 545
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Case for the Radxa Rock 5B+. It's fairly basic and open to allow for access and airflow. It's split in top and bottom parts, and requires extra hardware to join both parts.
You can see the exact BOM below, but the way we'll join the top and bottom parts will be through four M2 standoffs, and then four M2 screws on each side.
Place the top case onto its vent face, with the legs facing up, before printing.
BOM
| part | quantity | notes |
| 12mm M2 socket head cap screw | 4 | for the bottom case. 10mm might work too |
| 6mm M2 socket head cap screw | 4 | for the top case |
| 20mm M2 standoff female to female | 4 | for joining both parts. Either hex or circular |